Speed/Timing Sensor - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect harness assembly (2) from camshaft engine speed/timing sensor (1).
- Remove bolt (3) and the clip from camshaft engine speed/timing sensor (1). Remove camshaft engine speed/timing sensor (1).
Show/hide table
Illustration 2 g01074838 - Disconnect harness assembly (4) from the crankshaft engine speed/timing sensor.
- Remove the bolt and the clip from the crankshaft engine speed/timing sensor. Remove the crankshaft engine speed/timing sensor.
Show/hide table
| |
| Illustration 1 | g00517969 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
The speed/timing sensors must be installed to the proper depth for correct operation. The speed/timing sensors and the housing (front) must be free of any contaminates to ensure proper speed/timing sensors installation depth. |
- Install the crankshaft engine speed/timing sensor. Put the clip in position and install the bolt that holds the crankshaft engine speed/timing sensor.
- Connect harness assembly (4) to the crankshaft engine speed/timing sensor.
Show/hide table
Illustration 4 g00517969 - Install camshaft engine speed/timing sensor (1). Put the clip in position and install bolt (3).
- Connect harness assembly (2) to camshaft engine speed/timing sensor (1).
Show/hide table
| |
| Illustration 3 | g01074838 |
Caterpillar Information System:
3176C Engine Cooling System Coolant (DEAC) - Change
G3300 Engines Engine Air Cleaner Service Indicator - Inspect
3406E and 3456 Generator Set Engines Fan Drive - Install
3406E On-Highway Engine Fan Drive - Remove
3406E On-Highway Engine Fan Drive - Assemble
3304B and 3306B Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
3406E On-Highway Engine Fan Drive - Disassemble
G3300 Engines Cylinder Pressure - Measure/Record
3524B Engines for Off-Highway Trucks Too Much Valve Lash
3176C Engine Cylinder Liner
3406E On-Highway Engine Housing (Front) - Install
3406E On-Highway Engine Housing (Front) - Remove
3406C (PEEC III) Truck Engines Glossary of Electronic Control Terms
3406E On-Highway Engine Coolant Temperature Sensor - Remove and Install
3406E On-Highway Engine Engine Oil Pressure Sensor - Remove and Install
3500 Spark Ignited Engines Engine Design
318B Excavator Machine System Specifications Track Roller (Single Flange)
G3300 Engines Ignition System Spark Plugs - Inspect/Replace
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Oil in Cooling System
G3500 Engines Camshaft
C-10 and C-12 Truck Engines Compression Brake
G3300 Engines Cooling System Coolant (DEAC) - Change
3176C and 3196 Industrial Engines Engine Oil Pressure Sensor - Remove and Install
3176C and 3196 Industrial Engines Speed/Timing Sensor - Remove and Install