Parking Brake - Assemble
Assembly Procedure
Show/hide table
REQUIRED TOOLS     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Quantity     |
A     | 5P-0167     | Brake Spring Tool     | 1     |
- Install spring (13) between two brake shoes (14) and (15) .
Show/hide table
Illustration 1 | g00486896 |
- Use Tooling (A) to install springs (12) .
Show/hide table
Illustration 2 | g00486891 |
- Install parking brake lever (1) .
Show/hide table
Illustration 3 | g00486885 |
- Install three springs (11) to the original position.
Show/hide table
Illustration 4 | g00486823 |
- Install entire parking brake assembly (10) into the axle housing and install four bolts (9) .
Show/hide table
Illustration 5 | g00486820 |
- Install yoke (8), O-ring (7), shims (6), and washer (5) to the pinion shaft.
Show/hide table
Illustration 6 | g00486803 |
Show/hide table
Illustration 7 | g00486817 |
- Install bolt (4) .
Show/hide table
Illustration 8 | g00486772 |
- Install parking drum (3) and eight bolts (2) to the parking brake.
Show/hide table
Illustration 9 | g00486734 |
Show/hide table
Illustration 10 | g00486738 |
- Connect the parking brake cable to parking brake lever (1) and install the cotter pin.
Show/hide table
Illustration 11 | g00485962 |
End By: Install the drive shaft. Refer to Disassembly and Assembly, "Drive Shaft - Remove and Intall".
Caterpillar Information System:
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Inverter Valve (Secondary Brake)
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Motor (Hydrostatic) - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Motor (Hydrostatic) - Assemble
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Engine Rear Mount - Remove
784C and 785C Off-Highway Trucks Machine Systems Metering Pump (Steering) - Remove
583R Pipelayer Engine Supplement Engine and Torque Divider - Remove
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Pump Efficiency Check
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Motor (Hydrostatic) - Disassemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Motor (Hydrostatic) - Remove
583R Pipelayer Engine Supplement Radiator Guard and Radiator - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3406E On-Highway Engine Engine Oil Cooler - Disassemble
D7R Track-Type Tractor Power Train Sprocket Segment - Remove and Install
583R Pipelayer Power Train Track Roller - Disassemble
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Water Tank (Front)
583R Pipelayer Engine Supplement Engine and Torque Divider - Install
797 Off-Highway Truck Power Train Transmission Planetary - Assemble
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Air Control Valve (Retarder)
784C and 785C Off-Highway Trucks Machine Systems Metering Pump (Steering) - Install
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Control Valve (Hoist)
583R Pipelayer Power Train Track Roller - Assemble
3306C Engines for Caterpillar Built Machines Cylinder Block
769D Off-Highway Truck and 771D Quarry Truck Access and Exit Procedures
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Hydraulic Tank (Torque Converter, Hoist, Brake and Transmission)