Pressure Switch (Steering and Brake Filter)
Show/hide table
Illustration 1 | g00441534 |
Tighten the pressure switch to the following torque. ... 71.5 ± 7.5 N·m (52.00 ± 5.50 lb ft)
Actuation pressure at -40 to 121°C (-40 to 250°F) ... 137.9 ± 13.8 kPa (20.0 ± 2.0 psi)
Minimum deactuation pressure at -40 to 121°C (-40 to 250°F) ... 82.7 kPa (12.0 psi)
The pressure switch is normally closed below the deactuation pressure.
Caterpillar Information System:
928G Wheel Loader Circuit Breakers and Fuses - Reset/Replace
627F Wheel Tractor-Scraper Window Washer Reservoir - Fill
994D Wheel Loader Braking System Check Valve (Brake Oil Cooler Bypass)
D8R Track-Type Tractor Leaving the Machine
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Hydraulic Electronic Control - Remove and Install
631E Series II Wheel Tractor-Scrapers Seat Suspension - Lubricate
928G Wheel Loader Lubricant Viscosities
623F Wheel Tractor-Scraper Hydraulic System Pressure and Flow Compensator Valve
D8R Track-Type Tractor Walk-Around Inspection
994D Wheel Loader Axle Oscillation Bearings - Lubricate
623F Wheel Tractor-Scraper Hydraulic System Piston Pump (Elevator)
928G Wheel Loader Sampling Interval and Location of Sampling Valve
631E Series II Wheel Tractor-Scrapers Window Wiper - Inspect/Replace
D7R Track-Type Tractor Power Train Steering Differential and Brakes
D7R Track-Type Tractor Power Train Brake Control Valve
631E Series II Wheel Tractor-Scrapers Wheel Bearing Oil - Change
994D Wheel Loader Braking System Brake Control (Parking Brake)
966G and 972G Wheel Loaders Power Train Tire and Rim (Front) - Remove and Install
D7R Track-Type Tractor Power Train Equalizer Bar
902 and 906 Wheel Loaders Tire and Rim
D7R Track-Type Tractor Power Train Recoil Group
966G and 972G Wheel Loaders Power Train Tire and Rim (Rear) - Remove and Install
D7R Track-Type Tractor Power Train Pivot Shaft
D5M Track-Type Tractor Caterpillar Monitoring System