D7R Track-Type Tractor Power Train Caterpillar

Illustration 1	g00445504

(1) Lubricate the bore with SAE 30W oil before assembly.

(2) Assemble the plate into the bore. Then, install the plug.

(3) Diameter of the bearing after assembly ... 160.30 ± 0.08 mm (6.31 ± 0.003 inch)

(3) Diameter of the shaft in the bearing area ... 160.00 ± 0.08 mm (6.30 ± 0.003 inch)

(4) Diameter of the bearing after assembly ... 171.82 ± 0.08 mm (6.76 ± 0.003 inch)

(4) Diameter of the shaft in the bearing area ... 171.50 ± 0.08 mm (6.75 ± 0.003 inch)

Note: The bearings must be flush with the bore.