Tire and Rim (Front) - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 504-9791 | Lift Gp (60Hz)(1) | 2 |
OR | |||
504-9793 | Lift Gp (50Hz)(2) | 2 | |
B | 8S-7615 | Pin | 1 |
8S-7621 | Tube | 1 | |
8S-7640 | Stand | 1 |
Show/hide table
(1) | High-Voltage (480V) Low-Voltage (240V) |
(2) | High-Voltage (400V) Low-Voltage (200V) |
Start By:
- Connect the steering frame lock.
- Remove six nuts (2). Remove fender (1).
Show/hide table
Illustration 2 g06369611 - Place Tooling (A) under the front frame. Use Tooling (A) to lift the machine. Refer to Tool Operating Manual, NEHS1303, "Lift Group (Stand - 25 Ton)" for more information on Tooling (A).
Show/hide table
Illustration 3 g00445227 - Support the machine with Tooling (B).
Show/hide table
Illustration 4 g00445228 - Use suitable lifting slings and a hoist to support the tire and the rim, as shown.
- Remove 20 bolts (3).
- Use a hoist to remove the tire and the rim as a unit. The combined weight of the tire and of the rim is
680 kg (1500 lb) .
Show/hide table
Illustration 1 | g00445224 |
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 504-9791 | Lift Gp (60Hz)(1) | 2 |
OR | |||
504-9793 | Lift Gp (50Hz)(2) | 2 | |
B | 8S-7615 | Pin | 1 |
8S-7621 | Tube | 1 | |
8S-7640 | Stand | 1 |
Show/hide table
(1) | High-Voltage (480V) Low-Voltage (240V) |
(2) | High-Voltage (400V) Low-Voltage (200V) |
- Use suitable lifting slings and a hoist to position the tire and the rim, as shown. The combined weight of the tire and of the rim is
680 kg (1500 lb) . - Install 20 bolts (3). The initial torque for bolts (3) is
570 ± 80 N·m (420 ± 60 lb ft) . Then turn bolts (3) by an extra 60 ± 5 degrees.Show/hide tableIllustration 6 g06369611 - Place Tooling (A) under the front frame as shown. Use Tooling (A) to lift the machine. Refer to Tool Operating Manual, NEHS1303, "Lift Group (Stand - 25 Ton)" for more information on Tooling (A).
Show/hide table
Illustration 7 g00445227 - Remove Tooling (B).
- Lower the machine. Remove Tooling (A).
Show/hide table
Illustration 8 g00445224 - Install fender (1). Install six nuts (2).
Show/hide table
Illustration 5 | g00445228 |
End By:
- Separate the steering frame lock.
Caterpillar Information System:
994D Wheel Loader Braking System Brake Control (Parking Brake)
631E Series II Wheel Tractor-Scrapers Wheel Bearing Oil - Change
D7R Track-Type Tractor Power Train Brake Control Valve
D7R Track-Type Tractor Power Train Steering Differential and Brakes
631E Series II Wheel Tractor-Scrapers Window Wiper - Inspect/Replace
994D Wheel Loader Braking System Pressure Switch (Steering and Brake Filter)
928G Wheel Loader Circuit Breakers and Fuses - Reset/Replace
627F Wheel Tractor-Scraper Window Washer Reservoir - Fill
994D Wheel Loader Braking System Check Valve (Brake Oil Cooler Bypass)
D8R Track-Type Tractor Leaving the Machine
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Hydraulic Electronic Control - Remove and Install
631E Series II Wheel Tractor-Scrapers Seat Suspension - Lubricate
D7R Track-Type Tractor Power Train Equalizer Bar
902 and 906 Wheel Loaders Tire and Rim
D7R Track-Type Tractor Power Train Recoil Group
966G and 972G Wheel Loaders Power Train Tire and Rim (Rear) - Remove and Install
D7R Track-Type Tractor Power Train Pivot Shaft
D5M Track-Type Tractor Caterpillar Monitoring System
902 and 906 Wheel Loaders Fuel Tank
D7R Track-Type Tractor Power Train Track Roller Frames
966G and 972G Wheel Loaders Power Train NoSPIN Differential - Assemble
D7R Track-Type Tractor Power Train Idlers (Track)
902 and 906 Compact Wheel Loaders Hydraulic System Bank Valve (Three)
D7R Track-Type Tractor Power Train Track Roller