Brake Control (Parking Brake)
Show/hide table
 | |
| Illustration 1 | g00445086 |
- Install cable assembly (2) in the column. Attach knob (1) .
- Pull knob (1) to the ENGAGED position.
- Attach yoke (4) to cable assembly (2) and connect the yoke to the parking brake lever.
- Tighten nut (5) to a torque of 8 ± 3 N·m (70.0 ± 25.0 lb in).
- Attach cable assembly (2) to bracket assembly (3). Tighten nuts (6) to a torque of 38 ± 7 N·m (28.0 ± 5.0 lb ft).
Caterpillar Information System:
631E Series II Wheel Tractor-Scrapers Wheel Bearing Oil - Change
D7R Track-Type Tractor Power Train Brake Control Valve
D7R Track-Type Tractor Power Train Steering Differential and Brakes
631E Series II Wheel Tractor-Scrapers Window Wiper - Inspect/Replace
994D Wheel Loader Braking System Pressure Switch (Steering and Brake Filter)
928G Wheel Loader Circuit Breakers and Fuses - Reset/Replace
627F Wheel Tractor-Scraper Window Washer Reservoir - Fill
994D Wheel Loader Braking System Check Valve (Brake Oil Cooler Bypass)
D8R Track-Type Tractor Leaving the Machine
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Hydraulic Electronic Control - Remove and Install
631E Series II Wheel Tractor-Scrapers Seat Suspension - Lubricate
928G Wheel Loader Lubricant Viscosities
966G and 972G Wheel Loaders Power Train Tire and Rim (Front) - Remove and Install
D7R Track-Type Tractor Power Train Equalizer Bar
902 and 906 Wheel Loaders Tire and Rim
D7R Track-Type Tractor Power Train Recoil Group
966G and 972G Wheel Loaders Power Train Tire and Rim (Rear) - Remove and Install
D7R Track-Type Tractor Power Train Pivot Shaft
D5M Track-Type Tractor Caterpillar Monitoring System
902 and 906 Wheel Loaders Fuel Tank
D7R Track-Type Tractor Power Train Track Roller Frames
966G and 972G Wheel Loaders Power Train NoSPIN Differential - Assemble
D7R Track-Type Tractor Power Train Idlers (Track)
902 and 906 Compact Wheel Loaders Hydraulic System Bank Valve (Three)