Platform Tilting
In order to permit easy access of the hydraulic components and the mechanical components, the platform can be tilted forward.
- Remove the bolts and panel (1) on each side of the machine.
Show/hide table
Illustration 2 g00349156 - Remove the bolt and nut (3). There is one bolt and one nut on each side of the machine.
Note: Four bolts hold the platform to the rubber isolation blocks.
Show/hide tableIllustration 3 g00349158 - Remove the bolt and nut (4) from each side of the machine.
- Attach an appropriate lifting device to hook (2).
Show/hide table
Illustration 4 g00349159 - Remove the bolts and nuts (5) and (7) on each side of the machine.
- Install the bolt and nut (5) in hole (6) on each side of the machine.
- Lift the platform until the bottom holes are aligned. When the hole in the arm (8) is aligned with the hole for bolt (7), install the bolt and nut (7).
- Carefully release the tension from hook (2).
Note: In order to lower the platform, reverse the procedure for raising the platform.
Show/hide table
Illustration 1 | g00349154 |
Caterpillar Information System:
Providing A Power Source to the Control Device for Snowblowers{1408, 6715, 7000} Providing A Power Source to the Control Device for Snowblowers{1408, 6715, 7000}
2001/12/03 Correction to Service Magazine , "Circle Drive can be Modified to Improve Performance" {5207}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0390 - FMI 05
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0390 - FMI 03
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Extendable Stick Cylinder
2002/05/20 Correction to Disassembly and Assembly Manual , "Front Wheel Bearing - Install" {4201}
CP-563C and CS-563C Vibratory Compactors Steering Frame Lock
2001/10/15 A New Solenoid Valve Is Used for Priority Valves {5479}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0367 - FMI 02
2001/12/03 New Relays and New Panel Seals are now Available {7451}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0347 - FMI 06
TK1051 Track Feller Buncher Machine Systems Main Control Valve - Assemble
TL5 Series Field Cultivator Implement Attaching
3126B Engine for Caterpillar Built Machines Electric Starting Motor
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems Evaporator Coil and Heater Coil - Remove
TL5 Series Field Cultivator Implement Detaching
3176C and 3196 Engines for Caterpillar Built Machines Low Power/Poor or No Response to Throttle
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems Evaporator Coil and Heater Coil - Install
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0390 - FMI 06
2001/11/12 Corrections to Specifications , "Cylinder Head Valve" {1104}
TL5 Series Field Cultivator Implement Adjustments
TH210 and TH215 Telehandlers Steering System Steering System
740 EJECTOR Articulated Truck Reference Material
416D Backhoe Loader Light Switches - If Equipped