Engine Starting
Show/hide table
NOTICE |
---|
Do not crank the engine for more than 30 seconds. Allow the starter to cool for two minutes before cranking again. Turbocharger damage can result, if the engine is not kept low until the engine oil light/gauge verifies the oil pressure is sufficient. The key must be in the RUN position with the engine on in order to maintain electrical and hydraulic functions and to prevent serious machine damage. If the engine does not start, return the key to the OFF position before you return it to START. |
Show/hide table
Illustration 1 | g00610488 |
- Move vibratory amplitude control (2) to the OFF position.
- Move propel control (1) to the STOP position.
- Push parking brake knob (3) downward.
- Rock throttle control (4) rearward to the LOW RPM position.
Show/hide table
Illustration 2 | g00477718 |
- In order to crank the engine, turn key (5) to the START position. When the engine starts, release the key.
Show/hide table
Illustration 3 | g00477780 |
Caterpillar Information System:
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0346 - FMI 06
Topcon® System Five Part Number Location
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Piston Pump (Steering) - Install
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Stopping the Engine if an Electrical Malfunction Occurs
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Final Drive Planetary (Drum) Oil - Check
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Piston Pump (Steering) - Remove
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Gear Pump (Hoist) - Install
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Pressure Switch (Automatic Retarder)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Boom Cylinder
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Gear Pump (Hoist) - Remove
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Pressure Switch (Retarder)
3408E and 3412E Engines for Caterpillar Built Machines Camshaft - Remove
773E Off-Highway Truck/Tractor and 775E Quarry Truck Access and Exit Procedures
TK1051 Track Feller Buncher Machine Systems Main Control Valve - Disassemble
TL5 Series Field Cultivator Electrical System
2001/10/01 Improved Troubleshooting Procedures for EMCPII, EMCPII+, and EMCPII+P Annunciators {4490}
3024C Engine for Caterpillar Built Machines Water Pump - Install
Machine Security System Time - Set
3024C Engine for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Swing Cylinder
Machine Security System Product Identification Number - Program
2001/10/15 A New Rod is Used in the Front Suspension Group for Improved Service Life {7200, 7201}
3024C Engine for Caterpillar Built Machines Rocker Shaft - Disassemble
3024C Engine for Caterpillar Built Machines Rocker Shaft - Assemble