3024C Engine for Caterpillar Built Machines Caterpillar

Installation Procedure

1. Remove all debris and gasket material from the mating surfaces of the water pump and the cylinder head.

Show/hide table



Illustration 1	g00825811

2. Install new gasket (7) in position on the engine.

3. Place water pump (4) in position on the engine and install bolts (8) and nut (10) . Tighten nut (10) and bolts (8) that fasten water pump (4) to the engine.

4. Install lower hose (not shown) and tighten the hose clamp. Install hose (11) on water pump (4) and tighten hose clamps (9) .

Show/hide table



Illustration 2	g00825842

5. Place alternator bracket (6) into position on water pump (4) and install bolt (5) on water pump (4) .

Show/hide table



Illustration 3	g00831690

6. Install pulley (3) and adapter (2) on water pump (4) . Install set screws (1) and tighten to a torque of 11 N·m (8 lb ft).

7. Fill the cooling system with coolant to the correct level. Refer to Operation and Maintenance Manual, "Refill Capacities".

End By:

1. Install the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
2. Install the V-Belts. Refer to Disassembly and Assembly, "V-Belts - Remove and Install".