Electrical System
The TL5 Series Cultivators includes a lighting arrangement that is required for transporting the implement. This is a 12 volt system.
Show/hide table
 | |
| Illustration 1 | g00831726 |
Electrical connector (1) is stored in location (2).
Show/hide table
 | |
| Illustration 2 | g00808620 |
Electrical connector (1) will plug into power outlet (3).
Show/hide table
 | |
| Illustration 3 | g00831750 |
(White (Ground)) 1A (Brown (Tail light)) 1B (Green (Right turn)) 1C (Auxillary) 1D (Yellow (Left Turn)) 1E | |
Illustration 3 shows electrical connector (1) and the use for each connector.
Show/hide table
 | |
| Illustration 4 | g00831735 |
(Red tail lamp) 4 (Flashing extremity lights) 5 (Auxillary plug) 6 | |
Rear lights (4) and (5) are located at the back of the implement, as shown.
Note: Make sure that you check the rear lights for correct operation before transporting the implement.
Show/hide table
 | |
| Illustration 5 | g00835406 |
Auxiliary plug (6) is provided in order to allow electrical connections to implements that are being towed behind the field cultivator.
Caterpillar Information System:
TK1051 Track Feller Buncher Machine Systems Main Control Valve - Disassemble
773E Off-Highway Truck/Tractor and 775E Quarry Truck Access and Exit Procedures
CS-531D, CP-533D and CS-533D Vibratory Compactors Engine Starting
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0346 - FMI 06
Topcon® System Five Part Number Location
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Piston Pump (Steering) - Install
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Stopping the Engine if an Electrical Malfunction Occurs
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Final Drive Planetary (Drum) Oil - Check
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Piston Pump (Steering) - Remove
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Gear Pump (Hoist) - Install
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Pressure Switch (Automatic Retarder)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Boom Cylinder
2001/10/01 Improved Troubleshooting Procedures for EMCPII, EMCPII+, and EMCPII+P Annunciators {4490}
3024C Engine for Caterpillar Built Machines Water Pump - Install
Machine Security System Time - Set
3024C Engine for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Swing Cylinder
Machine Security System Product Identification Number - Program
2001/10/15 A New Rod is Used in the Front Suspension Group for Improved Service Life {7200, 7201}
3024C Engine for Caterpillar Built Machines Rocker Shaft - Disassemble
3024C Engine for Caterpillar Built Machines Rocker Shaft - Assemble
3024C Engine for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
TL5 Series Field Cultivator Plate Locations and Film Locations
773E Off-Highway Truck/Tractor and 775E Quarry Truck Leaving the Machine