14H and 16H Motor Graders Hydraulic and Steering System Caterpillar


Blade Tip Cylinder

Usage:

14H ASE



Illustration 1g00812149

(A) Outer diameter of new piston over two lands ... 101.10 ± 0.03 mm (3.980 ± 0.001 inch)

(B) Bore of new cylinder assembly ... 101.60 ± 0.08 mm (4.000 ± 0.003 inch)

(C) Outer diameter of new rod ... 50.750 ± 0.038 mm (1.9980 ± 0.0015 inch)

(D) Bore of new head over four lands ... 51.13 ± 0.03 mm (2.013 ± 0.001 inch)

(1) Apply 7M-7456 Bearing Mount Compound to the seal groove prior to assembling the wiper seal.

(2) Lubricate sealing lips with a thin covering of the lubricant that is being sealed.

(3) Torque for head ... 600 ± 130 N·m (440 ± 95 lb ft)

Note: Lubricate the threads with clean grease. Use 1P-0808 Grease Cartridge Group to apply the grease.

Caterpillar Information System:

TK1051 Track Feller Buncher Machine Systems Main Control Valve - Install
140H and 160H Motor Graders Engine Oil Sample - Obtain
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System MID 027 - CID 0444 - FMI 06
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Relief Valve (Secondary Steering Main) - Test and Adjust
120H and 135H Motor Graders Engine Crankcase Breather - Replace
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System MID 027 - CID 0444 - FMI 05
140H and 160H Motor Graders Engine Oil Level - Check
740 and 740 EJECTOR Articulated Trucks Power Train Transmission Hydraulic Control Valve - Disassemble
14H Motor Grader Operation Information
3500B Engines Electronic Control Terms
2001/07/30 Revision to Systems Operation, Testing and Adjusting , "Towing Brake Release" {4250, 4257}
69D and 769D Off-Highway Truck and 771D Quarry Truck Hydraulic System Hoist System Enable - Check
140H and 160H Motor Graders Ether Starting Aid Cylinder - Replace
2001/07/30 Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
TK1051 Track Feller Buncher Machine Systems Front Idler and Track Adjuster - Remove
14H and 16H Motor Graders Hydraulic and Steering System Centershift Cylinder
TK1051 Track Feller Buncher Machine Systems Front Idler and Track Adjuster - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Worksheets
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System MID 027 - CID 0562 - FMI 09
3500B Engines for 5130B and 5230B Excavators Electrical Connectors and Functions
120H and 135H Motor Graders Fuel Tank Cap and Strainer - Clean
TK1051 Track Feller Buncher Machine Systems Sprocket - Remove and Install
797 Off-Highway Truck Engine Supplement Fan - Install
120H and 135H Motor Graders Hydraulic System Oil - Change
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.