Main Control Valve - Install
Installation Procedure
- Attach a hoist and a suitable lifting device to the main control valve. The weight of the main control valve is 691 kg (1525 lb).
- Place the main control valve into position on the machine.
- Install four mounting bolts (13) .
Show/hide table
 | |
| Illustration 1 | g00811964 |
- Connect tubes (11) and (12) .
Show/hide table
 | |
| Illustration 2 | g00812133 |
- Connect tube (9) and install the four bolts.
Show/hide table
 | |
| Illustration 3 | g00829805 |
- Connect tube (10) and install the four bolts.
- Connect tube (7) and install the four bolts.
Show/hide table
 | |
| Illustration 4 | g00829806 |
- Connect the block and install four bolts (8) .
- Connect four hoses (5). Install four bolts (6) in each line.
Show/hide table
 | |
| Illustration 5 | g00829803 |
- Connect six hoses (3) on the top of the main control valve. Connect the same hoses on the bottom of the control valve.
Show/hide table
 | |
| Illustration 6 | g00812053 |
- Connect hoses (1) and (2) .
Show/hide table
 | |
| Illustration 7 | g00809744 |
- Close the engine hood.
Caterpillar Information System:
140H and 160H Motor Graders Engine Oil Sample - Obtain
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System MID 027 - CID 0444 - FMI 06
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Relief Valve (Secondary Steering Main) - Test and Adjust
120H and 135H Motor Graders Engine Crankcase Breather - Replace
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System MID 027 - CID 0444 - FMI 05
140H and 160H Motor Graders Engine Oil Level - Check
740 and 740 EJECTOR Articulated Trucks Power Train Transmission Hydraulic Control Valve - Disassemble
14H Motor Grader Operation Information
3500B Engines Electronic Control Terms
2001/07/30 Revision to Systems Operation, Testing and Adjusting , "Towing Brake Release" {4250, 4257}
69D and 769D Off-Highway Truck and 771D Quarry Truck Hydraulic System Hoist System Enable - Check
325D and 329D Excavators Condenser (Refrigerant) - Clean
14H and 16H Motor Graders Hydraulic and Steering System Blade Tip Cylinder
140H and 160H Motor Graders Ether Starting Aid Cylinder - Replace
2001/07/30 Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
TK1051 Track Feller Buncher Machine Systems Front Idler and Track Adjuster - Remove
14H and 16H Motor Graders Hydraulic and Steering System Centershift Cylinder
TK1051 Track Feller Buncher Machine Systems Front Idler and Track Adjuster - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Worksheets
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System MID 027 - CID 0562 - FMI 09
3500B Engines for 5130B and 5230B Excavators Electrical Connectors and Functions
120H and 135H Motor Graders Fuel Tank Cap and Strainer - Clean
TK1051 Track Feller Buncher Machine Systems Sprocket - Remove and Install
797 Off-Highway Truck Engine Supplement Fan - Install