Front Idler and Track Adjuster - Install
Installation Procedure
- Place front idler (2) and track adjuster (4) into position.
Show/hide table
Illustration 1 | g00723210 |
- Install washers and four bolts (3) to the front idler (2) and track adjuster (4) .
- Attach a hoist and a suitable lifting device to the front idler and the track adjuster. The weight of the front idler and track adjuster is 388 kg (855 lb). Position the front idler and the track adjuster on the machine.
Show/hide table
Illustration 2 | g00576855 |
Typical example |
- Slide the front idler and track adjuster (1) into the undercarriage frame.
- Repeat Steps 1 through 4 for the front idler and the track adjuster on the other side.
End By: Connect the track. Refer to Disassembly and Assembly, "Track - Connect".
Caterpillar Information System:
14H and 16H Motor Graders Hydraulic and Steering System Centershift Cylinder
TK1051 Track Feller Buncher Machine Systems Front Idler and Track Adjuster - Remove
2001/07/30 Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
140H and 160H Motor Graders Ether Starting Aid Cylinder - Replace
14H and 16H Motor Graders Hydraulic and Steering System Blade Tip Cylinder
TK1051 Track Feller Buncher Machine Systems Main Control Valve - Install
140H and 160H Motor Graders Engine Oil Sample - Obtain
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System MID 027 - CID 0444 - FMI 06
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Relief Valve (Secondary Steering Main) - Test and Adjust
120H and 135H Motor Graders Engine Crankcase Breather - Replace
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System MID 027 - CID 0444 - FMI 05
140H and 160H Motor Graders Engine Oil Level - Check
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Worksheets
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System MID 027 - CID 0562 - FMI 09
3500B Engines for 5130B and 5230B Excavators Electrical Connectors and Functions
120H and 135H Motor Graders Fuel Tank Cap and Strainer - Clean
TK1051 Track Feller Buncher Machine Systems Sprocket - Remove and Install
797 Off-Highway Truck Engine Supplement Fan - Install
120H and 135H Motor Graders Hydraulic System Oil - Change
120H and 135H Motor Graders Hydraulic System Oil Filter - Replace
14H and 16H Motor Graders Hydraulic and Steering System Sideshift Cylinder
769D Off-Highway Truck and 771D Quarry Truck Steering System Front Axle - Install and Adjust
550, 570 and 580 Wheel Harvesters Battery Disconnect Switch
TK1051 Track Feller Buncher Machine Systems Control Valve (Felling Head) - Remove