Axle Guard - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1U-9744 | 液压千斤顶 | 1 |
- 利用工具 (A) 撑住轮轴防护罩 (2) 。 拆下螺栓 (1) 。 将轮轴防护罩 (2) 从机器上拆下。 轮轴防护罩的重量约为 40 kg (88 lb)。
Show/hide table
 | |
| 图 1 | g01016901 |
安装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1U-9744 | 液压千斤顶 | 1 |
- 将轮轴防护罩 (2) 定位到机器下方。 利用工具 (A) 将轮轴防护罩 (2) 定位到机架上。 轮轴防护罩的重量约为 40 kg (88 lb)。 安装螺栓 (1) 。
Show/hide table
| | |
| 图 2 | g01016901 |
Caterpillar Information System:
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Gear Pump (Hoist) - Install
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Using Caterpillar Monitoring System to Determine Diagnostic Codes
446B Backhoe Loader Transmission (Autoshift) Transmission and Torque Converter - Test
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Using Vital Information Management System to Determine Diagnostic Codes
793B Off-Highway Truck Power Train Visual Inspection (Power Train)
2001/07/30 New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
769D Off-Highway Truck/Tractor and 771D Quarry Truck Engine Oil and Filter - Change
TL2 Series In-Line Rippers Shear Bolt - Replace
793B Off-Highway Truck Power Train Specifications (Power Train)
TK1051 Track Feller Buncher Machine Systems Main Control Valve - Remove
37-MT, 41-MT, and 42-MT Series Starting Motors General Information
446B Backhoe Loader Transmission (Autoshift) Pressure Taps
740 and 740 EJECTOR Articulated Trucks Power Train Transmission Shift Points - Test
TH210 and TH215 Telehandlers Towing the Machine
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ Electrical Component and Connector Locations
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System Electronic Control Module (ECM) - Replace
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System Glossary of Terms
PM-465 Cold Planer Conveyor Controls
2001/08/06 The Enclosure for the Brake Linkage Has Been Improved {4250}
TH210 and TH215 Telehandlers Engine Starting
Product Link 151/201 Wiring Harness (Open Circuit) - Test
37-MT, 41-MT, and 42-MT Series Starting Motors Pinion Clearance - Adjust
2001/07/09 The Bolt that Attaches the Gear Shroud Assembly to the PTO case Has Been Lengthened {3107}
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Using Caterpillar Electronic Technician to Determine Diagnostic Codes