PM-465 Cold Planer Caterpillar


Conveyor Controls

Usage:

PM-465 5ZS



Illustration 1g00810026

Note: The conveyor system can be controlled from either side of the control console or from the control at ground level.


On Switch (1) - Momentarily, depress the switch upward. This will turn both conveyors ON.


Off Switch (1) - Momentarily, depress the switch downward. This will turn both conveyors OFF.


Fast Speed Switch (2) - Depress the switch upward. This allows high variable conveyor speeds.


Slow Speed Switch (2) - Depress the switch downward. This allows low variable conveyor speeds.


Conveyor Speed Switch (3) - This is a momentary switch. Depress the switch. This will increase the speed for the second stage conveyor. Release the switch. This allows the conveyor speed to return to normal speed.


Joystick Control (4) - Push the control forward. This will move the conveyor downward. Pull the control rearward. This will move the conveyor upward. Push the control to the left side. This will move the conveyor to the left. Push the control to the right side. This will move the conveyor to the right side.

Caterpillar Information System:

M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System Glossary of Terms
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System Electronic Control Module (ECM) - Replace
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ Electrical Component and Connector Locations
TH210 and TH215 Telehandlers Towing the Machine
740 and 740 EJECTOR Articulated Trucks Power Train Transmission Shift Points - Test
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Axle Guard - Remove and Install
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Gear Pump (Hoist) - Install
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Using Caterpillar Monitoring System to Determine Diagnostic Codes
446B Backhoe Loader Transmission (Autoshift) Transmission and Torque Converter - Test
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Using Vital Information Management System to Determine Diagnostic Codes
793B Off-Highway Truck Power Train Visual Inspection (Power Train)
2001/07/30 New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/08/06 The Enclosure for the Brake Linkage Has Been Improved {4250}
TH210 and TH215 Telehandlers Engine Starting
Product Link 151/201 Wiring Harness (Open Circuit) - Test
37-MT, 41-MT, and 42-MT Series Starting Motors Pinion Clearance - Adjust
2001/07/09 The Bolt that Attaches the Gear Shroud Assembly to the PTO case Has Been Lengthened {3107}
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Diagnostic Code List
A New Topcon<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> System Five Control and A New Mounting Bracket Are Available to Replace the Topcon<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> System Four Control{7000, 7220} A New Topcon<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> System Five Control and A New Mounting Bracket Are Available to Replace the Topcon<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> System Four Control{7000, 7220}
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Compression Brake Solenoid Circuit - Test
TK1051 Track Feller Buncher Machine Systems Main Hydraulic Pump Air Pressure - Purge
988G Wheel Loader Steering System Oil Filter (Steering and Implement Pilot)
988G Wheel Loader Steering System Pressure Switch (Pilot Oil Filter Bypass)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.