Cab Heater Group
Show/hide table
图 1 | g00772059 |
(1) 螺钉的扭矩 ... 1.2 ± .2 N·m (0.89 ± 0.15 lb ft)
(2) 螺钉的扭矩 ... 12 ± 3 N·m (9 ± 2 lb ft)
(3) 螺栓的扭矩 ... 12 ± 3 N·m (9 ± 2 lb ft)
(4) 锁紧螺母扭矩 ... 8 ± 3 N·m (6 ± 2 lb ft)
(5) 螺钉的扭矩 ... (9 ± 2 lb ft)
(6) 卡箍的扭矩 ... 7.5 ± .5 N·m (5.5 ± 0.4 lb ft)
(7) 螺钉的扭矩 ... 12 ± 3 N·m (9 ± 2 lb ft)
(8) 螺栓的扭矩 ... 12 ± 3 N·m (9 ± 2 lb ft)
(9) 螺栓的扭矩 ... 4.5 ± .5 N·m (3 ± 0.4 lb ft)
Caterpillar Information System:
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Plate Locations and Film Locations
236, 246, 252 and 262 Skid Steer Loaders Machine Systems Cab - Remove
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Drive Shaft Spline (Center) - Lubricate
140H and 160H Motor Graders Reference Material
797 Off-Highway Truck Power Train Gear Pump (Brake Cooling, Brake Actuation and Rear Axle Motor Drive) - Oil Sands Arrangement
322C Excavator Hydraulic System Engine Performance - Test - Engine Speed
247, 257, 267, 277 and 287 Multi Terrain Loaders Plate Locations and Film Locations
247, 257, 267, 277 and 287 Multi Terrain Loaders Rated Load
2001/02/05 A Relay Improves the Service Life of the Horn {1408, 7402}
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Cooling System Coolant Extender (ELC) - Add
2001/05/21 The Shims For The Front Stub Shaft Are Welded To The Track Frame {4151}
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System MID 081 - CID 0596 - FMI 09
2001/02/12 The Switches in the Joystick Control are Serviced Components {5059, 5705}
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Caterpillar Approved Work Tools
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Piston Pump (Steering)
2001/02/19 Correction to Parts Manuals for the Clamps on the Exhaust Heated Body Arrangement {1061}
Instructions for Installing CABSWIN {7600} Instructions for Installing CABSWIN {7600}
2001/02/19 Correction to the Parts Manuals of 776D Tractors and 777D Off-Highway Trucks {3160}
2001/06/04 A Cover is Now Used to Protect the Cooling Fan Hub {1350}
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Drive Shaft Support Bearing - Lubricate
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Seat Belt - Replace
2001/02/05 An Improved Slip Joint is Available {3253}
236, 246, 252 and 262 Skid Steer Loaders Machine Systems Cab - Install
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Air Filter Secondary Element - Replace