Correction to Parts Manuals for the Clamps on the Exhaust Heated Body Arrangement {1061}
- Articulated Truck:
- D250E Series II (S/N: 4PS1-UP)
- D250E (S/N: 5TN1-UP)
- D300E Series II (S/N: 5KS1-UP)
- D300E (S/N: 7FN1-UP)
The part numbers for the clamps on the exhaust heated body arrangement that are contained in the parts manuals are incorrect. Replace the information with the information that follows.
Show/hide table
Illustration 1 | g00772221 |
Exhaust heated body arrangement for the D250E and D300E Articulated Trucks (1) 7E-6455 Clamp (2) 141-1480 Clamp As |
Show/hide table
Illustration 2 | g00772218 |
Exhaust elbow group for the D250E and D300E Articulated Trucks (1) 7E-6455 Clamp (2) 141-1480 Clamp As |
Show/hide table
Illustration 3 | g00772180 |
Exhaust heated body arrangement for the D250E Series II and D300E Series II Articulated Trucks (1) 7E-6455 Clamp (2) 141-1480 Clamp As |
Show/hide table
Illustration 4 | g00772179 |
Exhaust Elbow Group for the D250E Series II and D300E Series II Articulated Trucks (1) 7E-6455 Clamp (2) 141-1480 Clamp As |
Caterpillar Information System:
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Piston Pump (Steering)
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Caterpillar Approved Work Tools
2001/02/12 The Switches in the Joystick Control are Serviced Components {5059, 5705}
CP-663E, CS-663E and CS-683E Paving Compactors Machine Systems Cab Heater Group
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Plate Locations and Film Locations
236, 246, 252 and 262 Skid Steer Loaders Machine Systems Cab - Remove
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Drive Shaft Spline (Center) - Lubricate
140H and 160H Motor Graders Reference Material
797 Off-Highway Truck Power Train Gear Pump (Brake Cooling, Brake Actuation and Rear Axle Motor Drive) - Oil Sands Arrangement
322C Excavator Hydraulic System Engine Performance - Test - Engine Speed
247, 257, 267, 277 and 287 Multi Terrain Loaders Plate Locations and Film Locations
247, 257, 267, 277 and 287 Multi Terrain Loaders Rated Load
Instructions for Installing CABSWIN {7600} Instructions for Installing CABSWIN {7600}
2001/02/19 Correction to the Parts Manuals of 776D Tractors and 777D Off-Highway Trucks {3160}
2001/06/04 A Cover is Now Used to Protect the Cooling Fan Hub {1350}
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Drive Shaft Support Bearing - Lubricate
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Seat Belt - Replace
2001/02/05 An Improved Slip Joint is Available {3253}
236, 246, 252 and 262 Skid Steer Loaders Machine Systems Cab - Install
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Air Filter Secondary Element - Replace
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System Monitoring System (Power Train Functions)
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Air Precleaner - Clean
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Axle
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers 3116 Engine Supplement Hydraulic Oil Cooler - Remove and Install