Engine Air Filter Secondary Element - Replace
Show/hide table
NOTICE |
---|
Always replace the secondary filter element. Never attempt to reuse it by cleaning. The secondary filter element should be replaced at the time the primary element is serviced for the third time. The secondary filter element should also be replaced if the yellow piston in the filter element indicator enters the red zone after installation of a clean primary element, or if the exhaust smoke is still black. |
Show/hide table
Illustration 1 | g00772297 |
- Open the engine hood. Access the air cleaner from the left side of the machine.
Show/hide table
Illustration 2 g00281967 - Loosen the clips which hold air cleaner housing cover (1). Remove the air cleaner housing cover.
- Remove primary filter element (2) from the air cleaner housing.
Reference: For the proper procedure, refer to Operation and Maintenance Manual, "Engine Air Filter Primary Element - Clean/Replace".
Show/hide tableIllustration 3 g00864077 - Remove the secondary filter element.
Show/hide table
Illustration 4 g00864079 - Cover the air inlet opening. Clean the inside of the air cleaner housing.
- Inspect the gasket between the air inlet pipe and the air cleaner housing. Replace the gasket if the gasket is damaged.
- Uncover the air inlet opening. Install a new secondary filter element.
- Install the primary filter element and the air cleaner housing cover. Fasten the clips in order to secure the air cleaner housing cover.
- Close the engine hood.
Caterpillar Information System:
236, 246, 252 and 262 Skid Steer Loaders Machine Systems Cab - Install
2001/02/05 An Improved Slip Joint is Available {3253}
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Seat Belt - Replace
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Drive Shaft Support Bearing - Lubricate
2001/06/04 A Cover is Now Used to Protect the Cooling Fan Hub {1350}
2001/02/19 Correction to the Parts Manuals of 776D Tractors and 777D Off-Highway Trucks {3160}
Instructions for Installing CABSWIN {7600} Instructions for Installing CABSWIN {7600}
2001/02/19 Correction to Parts Manuals for the Clamps on the Exhaust Heated Body Arrangement {1061}
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Piston Pump (Steering)
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Caterpillar Approved Work Tools
2001/02/12 The Switches in the Joystick Control are Serviced Components {5059, 5705}
CP-663E, CS-663E and CS-683E Paving Compactors Machine Systems Cab Heater Group
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System Monitoring System (Power Train Functions)
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Air Precleaner - Clean
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Axle
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers 3116 Engine Supplement Hydraulic Oil Cooler - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train General Information - Machines with Integrated Braking System
525D, 535D, 545D, 555D Wheel Skidder Before Operation
2001/02/19 New Exhaust Tube Assembly {1061}
CP-663E, CS-663E and CS-683E Paving Compactors Machine Systems Air Conditioner Group
143H and 163H Motor Graders Reference Material
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System Electronic Control Module (Power Train)
533 and 543 Wheel Feller Bunchers Parking
CP-663E, CS-663E and CS-683E Paving Compactors Machine Systems Cab Liner