Transmission Hydraulic Control
Show/hide table
Illustration 1 | g00751398 |
Top view of the transmission hydraulic control (1) Upshift solenoid (2) Downshift solenoid (3) Lockup solenoid |
Show/hide table
Illustration 2 | g00351014 |
Front view of the transmission hydraulic control (4) Rotary actuator (5) Cover (6) Pressure control valve (7) Manifold (8) Selector and pressure control valve (9) Plate (10) Manifold (11) Transmission lubrication relief valve |
Show/hide table
Illustration 3 | g00351015 |
Bottom view of the manifold (12) Passage from the transmission charging pump section (13) Passage for lubrication oil (14) Passage to No. 2 clutch (15) Passage to No. 4 clutch (16) Passage to No. 5 clutch (17) Passage to No. 1 clutch (18) Passage to No. 6 clutch (19) Passage to No. 3 clutch |
Show/hide table
Operation of Components in the Transmission Hydraulic Control     | |
Component     | Operation (Function)     |
Upshift solenoid (1)     | This solenoid controls the movement of rotary actuator (5) during upshifts.     |
Downshift solenoid (2)     | This solenoid controls the movement of rotary actuator (5) during downshifts.     |
Lockup solenoid (3)     | This solenoid sends signal oil in order to activate the torque converter lockup clutch. This solenoid determines the pressure setting of the dual stage relief valve.     |
Rotary actuator (4)     | This actuator controls movement of the rotary selector spool in selector and pressure control valve (8).     |
Pressure control valve (6)     | This valve controls oil flow, the rate of pressure increase and of pressure decrease, and oil pressure in the clutches.     |
Manifold (7)     | This manifold sends pump oil to rotary actuator (4).     |
Selector and pressure control valve (8)     | This valve controls system pressure and the amount and direction of pilot pressure oil that is sent to pressure control valve (6).     |
Manifold (10)     | This manifold sends oil to the clutches.     |
Transmission lubrication relief valve (11)     | This relief valve controls the pressure of the transmission lubrication oil.     |
Caterpillar Information System:
793B Off-Highway Truck Power Train Oil Cooler (Transmission)
836G Landfill Compactor and 834G Wheel Dozer Power Train Axle Guards (Front) - Remove and Install
793B Off-Highway Truck Power Train Oil Filter (Transmission Lubrication)
HP750 Processor Head Saw Unit
G3304 and G3306 Engines Flywheel Housing - Inspect
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Cab - Install
793B Off-Highway Truck Power Train Oil Filter (Transmission Charging)
2001/02/19 Special Instruction, REHS0911 , "Salvage Procedure for the Bore for the Idler Gear Bearing in the Output Transfer Gear Group" is now Available {3159}
3406E and 3456 Engines for Caterpillar Built Machines Cylinder Head Valves
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Supplement Electric Starting Motor - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Cylinder Head
793B Off-Highway Truck Power Train Gear Pump (Transmission and Brake Cooling)
3406E and 3456 Engines for Caterpillar Built Machines Camshaft
RM-250C Reclaimer Mixer Sampling Interval and Location of Sampling Valve
416D Backhoe Loader Hydraulic and Steering System General Information (Hydraulic System)
836G Landfill Compactor and 834G Wheel Dozer Power Train Axle Guards (Rear) - Remove and Install
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Holding Arm Pivot Bearing - Lubricate
CS-531D, CP-533D and CS-533D Vibratory Compactors Directional Turn Signal Control
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Holding Arm Cylinder - Lubricate
793B Off-Highway Truck Power Train Pump Drive
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Harvester Head System Pressure - Test/Adjust
3406E and 3456 Engines for Caterpillar Built Machines Engine Oil Filter Base
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Harvester Head - Clean/Inspect
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Feed Roller Chain - Inspect/Replace