Power Train Filter Guard - Remove and Install
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Remove three bolts (1) and the washers.
Show/hide table
Illustration 2 g00750736 - Place a suitable cart under guard assembly (3), as shown.
- Remove three bolts (2) and the washers. Lower guard assembly (3).
Show/hide table
Illustration 3 g00750737 - Remove bolt (4) and the washer. Remove the guard assembly.
Show/hide table
Illustration 4 g00750738 - Remove two bolts (5) and the washers.
Show/hide table
Illustration 5 g00750739 - Place a suitable cart under power train filter guard (8), as shown.
- Remove bolt (7) and the washer. Remove two bolts (6) and the washers.
- Carefully lower power train filter guard (8). The weight of the power train filter guard is
62 kg (135 lb) .
Show/hide table
Illustration 1 | g00750735 |
- Use a suitable cart to install power train filter guard (8), as shown. The weight of the power train filter guard is
62 kg (135 lb) . - Install bolt (7) and the washer. Install two bolts (6) and the washers.
Show/hide table
Illustration 7 g00750738 - Install two bolts (5) and the washers.
Show/hide table
Illustration 8 g00750737 - Install bolt (4) and the washer.
Show/hide table
Illustration 9 g00750736 - Use a suitable cart to install guard assembly (3), as shown.
- Install three bolts (2) and the washers.
Show/hide table
Illustration 10 g00750735 - Install three bolts (1) and the washers.
Show/hide table
Illustration 6 | g00750739 |
End By:
- Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
836G Landfill Compactor and 834G Wheel Dozer Power Train Compactor Wheel - Install
730,735 and 730 EJECTOR Articulated Truck Systems Parking Brake
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Alert Indicator Never Flashes
725 and 730 Articulated Trucks Braking System Pressure Switch (Parking Brake)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Alert Indicator Is Always Flashing
725 and 730 Articulated Trucks Braking System Pressure Switch (Stop Light, Transmission Signal)
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0168 - FMI 00
735, 740 and 740 EJECTOR Articulated Trucks Braking System Check and Pressure Reducing Valve
3408E and 3412E Engines for Caterpillar Built Machines CID 0596 FMI 09 Unable to communicate with Implement ECM
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Quick Coupler - Assemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Cab - Remove
836G Landfill Compactor and 834G Wheel Dozer Power Train Compactor Wheel - Remove
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Piston Pump (On Demand Fan) - Install
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders Safety Messages - Arrangement I
836G Landfill Compactor and 834G Wheel Dozer Power Train Striker Bar - Remove
RM-250C Reclaimer Mixer Seat
836G Landfill Compactor and 834G Wheel Dozer Power Train Striker Bar - Install
RM-250C Reclaimer Mixer Changing Engine Speed
424D, 428D and 438D Backhoe Loaders Axle Universal Joint (Front) - Lubricate
836G Landfill Compactor and 834G Wheel Dozer Power Train Modulating Valve (Transmission Clutch) - Remove
836G Landfill Compactor and 834G Wheel Dozer Power Train Modulating Valve (Transmission Clutch) - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Transmission (Direct Drive) Transmission (Two-Wheel Drive)
424D, 428D and 438D Backhoe Loaders Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
836G Landfill Compactor and 834G Wheel Dozer Power Train Relief Valve (Transmission Hydraulic Control) - Remove