Compactor Wheel - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 504-9826 | Lift Gp (50/60 Hz)(1) | 2 |
OR | |||
504-9827 | Lift Gp (50/60 Hz)(2) | 2 |
Show/hide table
(1) | High-Voltage (380-500V) |
(2) | Low-Voltage (180-300V) |
Start By:
- Connect the steering frame lock.
Show/hide table
Follow the recommended procedure for removal and installation of tires and or wheel assemblies. Ensure that the machine and tire and or wheel assembly are properly supported at all times. Improper procedures that are used to remove and install tires and or wheel assemblies can result in personal injury or death. |
- Lower the blade to the ground.
Show/hide table
Illustration 1 g06358263 Front frame Show/hide tableIllustration 2 g06358266 Rear frame - Install Tooling (A) under the front or the rear frame, as shown. Refer to Tool Operating Manual, NEHS1328, "Lift Group (Stand - 60 Ton)" for more information on Tooling (A).
Show/hide table
Illustration 3 g00750652 - Use a suitable lift truck to support the compactor wheel, as shown. Use suitable chains to secure the compactor wheel to the lift truck, as shown.
Show/hide table
Illustration 4 g00750653 - Remove bolts (1) and the washers.
Show/hide table
Illustration 5 g00750654 - Use the lift truck to remove compactor wheel (2). The weight of the compactor wheel is
3518 kg (7760 lb) .
Caterpillar Information System:
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Steering System Troubleshooting
Salvage Procedure for the Bore for the Idler Gear Bearing in the Output Transfer Gear Group Salvage Procedure for the Bore for the Idler Gear Bearing in the Output Transfer Gear Group
2000/11/27 Guidelines for setting up Differential Groups {3258}
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Boom - Assemble
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader Throttle Position Sensor Circuit - Test
793B Off-Highway Truck Power Train Electronic Control (Body Down or Up Switch)
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Piston Pump (On Demand Fan) - Remove
2002/06/17 New Hoist Pumps and New Rear Brake Cooling Pumps are Available for Off-Highway Trucks {5073}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Transmission (Direct Drive) Torque Converter
2000/10/30 A New Seal Is Used In The Alternator Mounting Group {1405}
RM-250C Reclaimer Mixer Changing Speed and Direction
793B Off-Highway Truck Power Train Electronic Programmable Transmission Control (EPTC II)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Cab - Remove
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Quick Coupler - Assemble
3408E and 3412E Engines for Caterpillar Built Machines CID 0596 FMI 09 Unable to communicate with Implement ECM
735, 740 and 740 EJECTOR Articulated Trucks Braking System Check and Pressure Reducing Valve
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0168 - FMI 00
725 and 730 Articulated Trucks Braking System Pressure Switch (Stop Light, Transmission Signal)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Alert Indicator Is Always Flashing
725 and 730 Articulated Trucks Braking System Pressure Switch (Parking Brake)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Alert Indicator Never Flashes
730,735 and 730 EJECTOR Articulated Truck Systems Parking Brake
836G Landfill Compactor and 834G Wheel Dozer Power Train Compactor Wheel - Install
836G Landfill Compactor and 834G Wheel Dozer Power Train Power Train Filter Guard - Remove and Install