Compactor Wheel - Install
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 504-9826 | Lift Gp (50/60 Hz)(1) | 2 |
| OR | |||
| 504-9827 | Lift Gp (50/60 Hz)(2) | 2 | |
Show/hide table
| (1) | High-Voltage (380-500V) |
| (2) | Low-Voltage (180-300V) |
Show/hide table
 |
|
Follow the recommended procedure for removal and installation of tires and or wheel assemblies. Ensure that the machine and tire and or wheel assembly are properly supported at all times. Improper procedures that are used to remove and install tires and or wheel assemblies can result in personal injury or death. |
- Use a suitable lift truck and suitable chains to install compactor wheel (2). The weight of the compactor wheel is
3518 kg (7760 lb) .Show/hide table
Illustration 2 g00750653 - Install bolts (1) and the washers.
Show/hide table
Illustration 3 g06358263 Front frame Show/hide table
Illustration 4 g06358266 Rear frame - Lower the machine to the ground. Remove Tooling (A). Refer to Tool Operating Manual, NEHS1328, "Lift Group (Stand - 60 Ton)" for more information on Tooling (A).
Show/hide table
| |
| Illustration 1 | g00750654 |
End By:
- Separate the steering frame lock.
Caterpillar Information System:
730,735 and 730 EJECTOR Articulated Truck Systems Parking Brake
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Alert Indicator Never Flashes
725 and 730 Articulated Trucks Braking System Pressure Switch (Parking Brake)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Alert Indicator Is Always Flashing
725 and 730 Articulated Trucks Braking System Pressure Switch (Stop Light, Transmission Signal)
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0168 - FMI 00
735, 740 and 740 EJECTOR Articulated Trucks Braking System Check and Pressure Reducing Valve
3408E and 3412E Engines for Caterpillar Built Machines CID 0596 FMI 09 Unable to communicate with Implement ECM
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Quick Coupler - Assemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Cab - Remove
836G Landfill Compactor and 834G Wheel Dozer Power Train Compactor Wheel - Remove
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Steering System Troubleshooting
836G Landfill Compactor and 834G Wheel Dozer Power Train Power Train Filter Guard - Remove and Install
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Piston Pump (On Demand Fan) - Install
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders Safety Messages - Arrangement I
836G Landfill Compactor and 834G Wheel Dozer Power Train Striker Bar - Remove
RM-250C Reclaimer Mixer Seat
836G Landfill Compactor and 834G Wheel Dozer Power Train Striker Bar - Install
RM-250C Reclaimer Mixer Changing Engine Speed
424D, 428D and 438D Backhoe Loaders Axle Universal Joint (Front) - Lubricate
836G Landfill Compactor and 834G Wheel Dozer Power Train Modulating Valve (Transmission Clutch) - Remove
836G Landfill Compactor and 834G Wheel Dozer Power Train Modulating Valve (Transmission Clutch) - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Transmission (Direct Drive) Transmission (Two-Wheel Drive)
424D, 428D and 438D Backhoe Loaders Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate