Machine Operation Information
You should be sure that no person is working on the machine or that no person is near the machine when you operate the machine. Maintain control of the machine at all times.
You should reduce the speed of the engine when you are operating the machine in a tight area.
Show/hide table
 | |
| Illustration 1 | g00753867 |
- Move the propel lever (2) to the STOP position.
- Raise the rotor so that the rotor and the hood will clear any obstructions.
- Move throttle lever (3) for the engine to the RUN position. This position should be maximum RPM.
- Sound the horn (1) for several seconds in order to alert personnel.
- Disengage the parking brake.
- Move the propel lever (2) to the proper direction and to the proper speed for travel.
- You should use the propel lever (2) in order to reduce overspeed of the engine when the machine is moving down a hill.
- Operate the machine in a FORWARD direction in order to get maximum visibility.
Show/hide table
 |
Personal injury could result from the sudden stop of the machine. The parking brake is automatically engaged when brake oil pressure drops below an adequate operating pressure. |
 |
Caterpillar Information System:
797 Off-Highway Truck Air System Air Compressor - Check
725 and 730 Articulated Trucks Secondary Steering - Test
Caterpillar Monitoring System MID 030 - CID 0096 - FMI 03
2000/10/23 A New Deflector Has Been Added to the Mixing Chamber {6635}
2000/10/23 Holes Have Been Added to the Rotor Hood in order to Reduce Buildup of Material {6635}
2000/10/23 Improvements have been made to the Mixing Chamber of the Rotor Hood {5632, 5634, 6635}
2000/10/23 The Supply Hose for the Rotor Brake Line has been Rerouted {4257, 5056}
2000/10/30 New Lines Group for Lubrication of the Rotor Bearing {5057, 5608}
CP-663E, CS-663E and CS-683E Vibratory Compactors Battery or Battery Cable - Replace
CP-663E, CS-663E and CS-683E Vibratory Compactors Battery - Clean/Check
247, 257, 267, 277 and 287 Multi Terrain Loaders and 216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Auxiliary Hydraulic Electronic Control System MID 106 - CID 1189 - FMI 04
797 Off-Highway Truck Air System Pressure Protection Valve (Air System)
247, 257, 267, 277 and 287 Multi Terrain Loaders and 216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Auxiliary Hydraulic Electronic Control System MID 106 - CID 1190 - FMI 04
3114, 3116, and 3126 Engines for Caterpillar Built Machines Governor - Install
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader Injector Solenoid Circuit - Test
3114, 3116, and 3126 Engines for Caterpillar Built Machines Governor - Remove
2000/10/02 An Improved 152-8339 Solenoid Valve Group is Available {5479}
2000/10/02 An Improved 152-8346 Solenoid Valve Group is Available {5479}
2000/10/02 Installation of Larger Lower Lift Arm Bearings Improves Bucket Pin and Bearing Service Life {6107}
2000/10/02 A Gas Spring for the Hood is Available {7251}
2000/10/02 Improved Lower Lift Arm Bearings are Available {6107}
Caterpillar Monitoring System MID 030 - CID 0096 - FMI 08
Caterpillar Monitoring System MID 030 - CID 0100 - FMI 08
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Piston Motor (Propel)