- Road Reclaimer/Soil Stabilizer:
- RM-350B (PIN: 7FS1-UP)
Description of Change: A new deflector has been added to the mixing chamber. The deflector has been added in order to cover the gap between the mixing chamber and the upper edge of the rear door. Dust can penetrate this gap, restricting the operator's visibility and comfort. The rubber flashing will prevent material from escaping through the upper portion of the rear door.
Adaptable To: The new 196-3994 Deflector is effective with S/N:7FS00173
.
The new 196-3994 Deflector is adaptable to S/N:7FS1-00172
.
Rework Procedure
The following parts must be ordered in order to update existing machines with the new deflector.
Required Parts     | |||
Reference Number     | Quantity     | Part Number     | Description     |
1     | 1     | 196-3994     | Deflector     |
2     | 11     | 3K-6060     | Locknut     |
3     | 11     | 8T-4226     | Washer     |
4     | 11     | 3L-5549     | Weld Stud     |
- Refer to Illustration 1 for the general location of the deflector (1) .
Illustration 1 | g00744545 |
General Location for the Installation of the Deflector (1) 196-3994 Deflector (2) 3K-6060 Locknuts (3) 8T-4226 Washers (4) 3L-5549 Weld Stud |
- Weld the 3L-5549 Weld Stud in the locations that are shown in Illustration 2 and Illustration 3. The longitudinal spacing varies, and the transverse spacing is 50 ± 2 mm (2.0 ± 0.08 inch) from the bottom of the deflector.
Illustration 2 | g00744546 |
Longitudinal Spacing for the Weld Studs |
Illustration 3 | g00744547 |
Transverse Spacing for the Weld Studs |