Secondary Steering - Test
Lakukan pengujian kemudi sekunder dengan menggunakan prosedur berikut:
- Parkir mesin pada permukaan yang keras dan datar. Turunkan bak buang dan matikan engine. Biarkan kunci kontak start engine dalam posisi HIDUP.
- Tekan dan tahan bagian atas sakelar uji kemudi sekunder. Hal ini akan mengaktifkan motor kemudi sekunder.
Show/hide table
 | |
| Ilustrasi 0 | g00948899 |
- Putar roda kemudi secara penuh dari kiri ke kanan. Apabila mesin bereaksi terhadap input dari kemudi berarti kemudi sekunder bekerja. Apabila mesin tidak bereaksi terhadap input dari kemudi berarti kemudi sekunder tidak bekerja.
- Lepaskan sakelar uji kemudi sekunder. Gaya pegas akan mengembalikan sakelar uji kemudi sekunder ke posisi MATI. Hal ini akan mematikan motor kemudi sekunder. Jangan menjalankan motor kemudi sekunder lebih dari 12 detik saat melakukan pengujian kemudi sekunder.
Jangan mengoperasikan mesin apabila kemudi sekunder tidak bekerja dengan benar.
Caterpillar Information System:
Caterpillar Monitoring System MID 030 - CID 0096 - FMI 03
2000/10/23 A New Deflector Has Been Added to the Mixing Chamber {6635}
2000/10/23 Holes Have Been Added to the Rotor Hood in order to Reduce Buildup of Material {6635}
2000/10/23 Improvements have been made to the Mixing Chamber of the Rotor Hood {5632, 5634, 6635}
2000/10/23 The Supply Hose for the Rotor Brake Line has been Rerouted {4257, 5056}
2000/10/30 New Lines Group for Lubrication of the Rotor Bearing {5057, 5608}
CP-663E, CS-663E and CS-683E Vibratory Compactors Battery or Battery Cable - Replace
CP-663E, CS-663E and CS-683E Vibratory Compactors Battery - Clean/Check
247, 257, 267, 277 and 287 Multi Terrain Loaders and 216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Auxiliary Hydraulic Electronic Control System MID 106 - CID 1189 - FMI 04
797 Off-Highway Truck Air System Pressure Protection Valve (Air System)
RM-250C Reclaimer Mixer Walk-Around Inspection
RM-250C Reclaimer Mixer Rotor Raise/Lower Control
797 Off-Highway Truck Air System Air Compressor - Check
RM-250C Reclaimer Mixer Machine Operation Information
247, 257, 267, 277 and 287 Multi Terrain Loaders and 216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Auxiliary Hydraulic Electronic Control System MID 106 - CID 1190 - FMI 04
3114, 3116, and 3126 Engines for Caterpillar Built Machines Governor - Install
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader Injector Solenoid Circuit - Test
3114, 3116, and 3126 Engines for Caterpillar Built Machines Governor - Remove
2000/10/02 An Improved 152-8339 Solenoid Valve Group is Available {5479}
2000/10/02 An Improved 152-8346 Solenoid Valve Group is Available {5479}
2000/10/02 Installation of Larger Lower Lift Arm Bearings Improves Bucket Pin and Bearing Service Life {6107}
2000/10/02 A Gas Spring for the Hood is Available {7251}
2000/10/02 Improved Lower Lift Arm Bearings are Available {6107}
Caterpillar Monitoring System MID 030 - CID 0096 - FMI 08