Flywheel Housing
Show/hide table
 | |
| Illustration 1 | g00612544 |
Typical view | |
(1) Bearing joint position
- The bearing joint position is the following dimension off the vertical axis. ... 15 degrees ± 1 degree
(2) Apply 1U-8846 Sealant to all sealing surfaces of the flywheel housing. The flywheel housing must be assembled and tightened to the cylinder block within ten minutes.
Show/hide table
 | |
| Illustration 2 | g00612690 |
View A-A Typical on both sides | |
(3) Bearing depth
- The bearing depth is the following distance from the inside face of the flywheel housing. ... 4.0 ± 0.5 mm (0.16 ± 0.02 inch)
(4) Rear face of block
Caterpillar Information System:
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Ride Control Function
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) TPS Maximum Payload Speed Manager
2000/08/07 A New Engine Shutdown Switch is Available {7418}
2000/07/31 Correction to Parts Manual for the R1300 LHD {7301}
2000/08/07 Revision to Parts Manual for the R2900 LHD {5073}
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Electronic Control Module (Autoshift)
2000/08/07 Revision to Parts Manual for the R1700G LHD {5073}
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Automatic Shift Function
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Manual Shift Function
PF-300B and PS-300B Pneumatic Compactors Propel System Differential Lock - Check
TH103 Telehandler Tire Ballast
2014/08/11 Diagnostic Cables and Harnesses Are Available {0785}
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Remote Direction Control Function
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Transmission (Power Shift) - Disassemble
TH62, TH63, TH82 and TH83 Telehandlers Quick Coupler
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Front Axle - Remove
C-9 Engines for Caterpillar Built Machines Compression Brake
797 Off-Highway Truck Braking System Oil Filter (Brake Actuation)
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders and 247, 257, 267, 277 and 287 Multi Terrain Loaders Interlock Electronic Control System General Information
416D Backhoe Loader Tire Installation
2000/08/28 A New Check Valve Reduces Voiding {5067, 5104}
CB-334D and CB-335D Vibratory Compactors Operating Technique Information
IT28G Integrated Toolcarrier and 928G Wheel Loader Brake and Fan Drive System Gear Motor (Fan Drive)