Gear Motor (Fan Drive)
Show/hide table
 | |
| Illustration 1 | g00731150 |
(1) Case drain (2) 152-1957 Relief Valve | |
The rotation of the motor is counterclockwise when the motor is viewed from the shaft end of the motor.
Motor displacement ... 13 cc/rev (0.79 in3/rev)
Maximum continuous pressure ... 16000 kPa (2320 psi)
Maximum speed ... 1400 rpm
Minimum speed ... 300 rpm
(A) Inlet port
(B) Outlet port
(2) The torque for the relief valve ... 43.5 ± 17.5 N·m (32 ± 13 lb ft)
The pressure setting for the relief valve ... 15165 kPa (2200 psi)
Caterpillar Information System:
CB-334D and CB-335D Vibratory Compactors Operating Technique Information
2000/08/28 A New Check Valve Reduces Voiding {5067, 5104}
416D Backhoe Loader Tire Installation
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders and 247, 257, 267, 277 and 287 Multi Terrain Loaders Interlock Electronic Control System General Information
797 Off-Highway Truck Braking System Oil Filter (Brake Actuation)
C-9 Engines for Caterpillar Built Machines Compression Brake
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Front Axle - Remove
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
TH62, TH63, TH82 and TH83 Telehandlers Quick Coupler
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Transmission (Power Shift) - Disassemble
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Remote Direction Control Function
C-9 Engines for Caterpillar Built Machines Flywheel Housing
924G and 924Gz Wheel Loaders Brake and Fan Drive System Gear Pump (Fan Drive and Brakes)
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders and 247, 257, 267, 277 and 287 Multi Terrain Loaders Interlock Electronic Control System Engine Start Interlock
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders and 247, 257, 267, 277 and 287 Multi Terrain Loaders Interlock Electronic Control System Work Tool Interlock
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Front Axle - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Axles, Differential and Brakes Axle (Front)
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Tire Installation
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Axle Shaft - Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Window Wiper and Wiper Motor (Roof) - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Engine, Torque Converter and Transmission - Install
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders and 247, 257, 267, 277 and 287 Multi Terrain Loaders Interlock Electronic Control System Diagnostic Operation
CB-334D and CB-335D Vibratory Compactors Shipping the Machine
2000/08/07 An Improved Controller for the Fire Control System is Now Available {7400, 7401}