Gear Pump (Fan Drive and Brakes)
Show/hide table
 | |
| Illustration 1 | g00730549 |
Location of the pump for the brakes and fan drive | |
Show/hide table
 | |
| Illustration 2 | g00424028 |
A typical example of a section view of a gear pump. | |
The idler gear (3) meshes with the drive gear (1). The rotation of the two gears creates a partial vacuum. The partial vacuum is created at the pump inlet as the gear teeth separate. This draws the oil from the hydraulic tank. Oil enters the pump into cavity (4). The turning of the two gears causes the low pressure oil from cavity (4) to move around the inner pump housing to cavity (2). As the teeth mesh at the outlet port, the oil is forced out of the gear pump.
Caterpillar Information System:
IT28G Integrated Toolcarrier and 928G Wheel Loader Brake and Fan Drive System Gear Motor (Fan Drive)
CB-334D and CB-335D Vibratory Compactors Operating Technique Information
2000/08/28 A New Check Valve Reduces Voiding {5067, 5104}
416D Backhoe Loader Tire Installation
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders and 247, 257, 267, 277 and 287 Multi Terrain Loaders Interlock Electronic Control System General Information
797 Off-Highway Truck Braking System Oil Filter (Brake Actuation)
C-9 Engines for Caterpillar Built Machines Compression Brake
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Front Axle - Remove
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
TH62, TH63, TH82 and TH83 Telehandlers Quick Coupler
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Transmission (Power Shift) - Disassemble
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Remote Direction Control Function
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders and 247, 257, 267, 277 and 287 Multi Terrain Loaders Interlock Electronic Control System Engine Start Interlock
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders and 247, 257, 267, 277 and 287 Multi Terrain Loaders Interlock Electronic Control System Work Tool Interlock
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Front Axle - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Axles, Differential and Brakes Axle (Front)
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Tire Installation
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Axle Shaft - Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Window Wiper and Wiper Motor (Roof) - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Engine, Torque Converter and Transmission - Install
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders and 247, 257, 267, 277 and 287 Multi Terrain Loaders Interlock Electronic Control System Diagnostic Operation
CB-334D and CB-335D Vibratory Compactors Shipping the Machine
2000/08/07 An Improved Controller for the Fire Control System is Now Available {7400, 7401}
2000/08/07 Correction to Disassembly and Assembly , "Drive Shaft Center" {3253}