Manual Shift Function
When the auto/manual switch is in the MANUAL position, the operation of the ECM is manual. The ECM shifts the transmission into the gear that is selected by the operator.
When the downshift switch is pressed, the ECM downshifts the transmission. A downshift is only possible if gear 2 is selected with the shift lever. After a downshift, the ECM will shift the transmission back to gear 2 when there is a direction change. The ECM will also shift the transmission out of gear 1 and into gears 3 or 4, if gears 3 or 4 are selected with the shift lever.
Caterpillar Information System:
PF-300B and PS-300B Pneumatic Compactors Propel System Differential Lock - Check
TH103 Telehandler Tire Ballast
2014/08/11 Diagnostic Cables and Harnesses Are Available {0785}
2000/07/31 Correction to Parts Manual for R2900 LHD {3034}
2000/08/07 Revision to Parts Manual for R1300 LHD {3168, 4808, 4820}
2000/08/28 Slide Plates Are Now Available for Wheel Harvesters {6501, 6502, 6533}
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System General Information
2000/08/07 The Temperature Switch for the Transmission Has Changed {7413}
2000/08/07 Revision to Parts Manual for R1300 LHD {5057, 7554}
2000/07/31 An Improved Mounting Bracket for the Steering Metering Pump On Machines With Wheel Steering Is Now Available {4312}
CB-334D and CB-335D Vibratory Compactors Warranty Information
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) System Schematic
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Automatic Shift Function
2000/08/07 Revision to Parts Manual for the R1700G LHD {5073}
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Electronic Control Module (Autoshift)
2000/08/07 Revision to Parts Manual for the R2900 LHD {5073}
2000/07/31 Correction to Parts Manual for the R1300 LHD {7301}
2000/08/07 A New Engine Shutdown Switch is Available {7418}
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) TPS Maximum Payload Speed Manager
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Ride Control Function
C-9 Engines for Caterpillar Built Machines Flywheel Housing
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Remote Direction Control Function
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Transmission (Power Shift) - Disassemble
TH62, TH63, TH82 and TH83 Telehandlers Quick Coupler