Differential Lock - Check
Show/hide table
 |
Personal injury or death can result from sudden machine movement. The machine can move suddenly in the forward or reverse direction when adjustments are made to the drive system. To avoid machine movement, make sure that the machine is completely raised off of the ground and properly supported. Make sure that the area is clear of personnel and equipment while testing and adjusting. |
 |
- Move the machine to a smooth, horizontal location that is away from operating machines and away from personnel.
- Engage the parking brake. Place blocks around the front wheels.
- Lower the suspension system (if equipped).
- Place the rear of the machine on jack stands so that the wheels are not in contact with the ground. Place one jack stand on each side of the machine at the rear of the machine under the frame.
- Start the engine and release the parking brake.
- Place the direction and speed control lever in NEUTRAL.
- With the help of an assistant, rotate one wheel in the forward direction. The wheels on the opposite side should rotate in the reverse direction.
- Engage the differential lock.
Note: Hold the differential lock switch down in order to keep the differential lock engaged.
- With the help of an assistant, rotate one wheel in the forward direction. The wheels on the opposite side should rotate in the same direction.
Caterpillar Information System:
TH103 Telehandler Tire Ballast
2014/08/11 Diagnostic Cables and Harnesses Are Available {0785}
2000/07/31 Correction to Parts Manual for R2900 LHD {3034}
2000/08/07 Revision to Parts Manual for R1300 LHD {3168, 4808, 4820}
2000/08/28 Slide Plates Are Now Available for Wheel Harvesters {6501, 6502, 6533}
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System General Information
2000/08/07 The Temperature Switch for the Transmission Has Changed {7413}
2000/08/07 Revision to Parts Manual for R1300 LHD {5057, 7554}
2000/07/31 An Improved Mounting Bracket for the Steering Metering Pump On Machines With Wheel Steering Is Now Available {4312}
CB-334D and CB-335D Vibratory Compactors Warranty Information
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) System Schematic
CB-334D and CB-335D Vibratory Compactors Walk-Around Inspection
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Manual Shift Function
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Automatic Shift Function
2000/08/07 Revision to Parts Manual for the R1700G LHD {5073}
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Electronic Control Module (Autoshift)
2000/08/07 Revision to Parts Manual for the R2900 LHD {5073}
2000/07/31 Correction to Parts Manual for the R1300 LHD {7301}
2000/08/07 A New Engine Shutdown Switch is Available {7418}
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) TPS Maximum Payload Speed Manager
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Ride Control Function
C-9 Engines for Caterpillar Built Machines Flywheel Housing
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Remote Direction Control Function
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Transmission (Power Shift) - Disassemble