Engine Oil Cooler
Show/hide table
 | |
| Illustration 1 | g01416470 |
(1) Apply 5P-3413 Pipe Sealant to the plug threads.
(2) Core assembly
Show/hide table
 | |
| Illustration 2 | g01416497 |
(3) Core assembly
Show/hide table
 | |
| Illustration 3 | g01416635 |
Detail A | |
The oil flow rate through the cooler assembly is 123 L/min (32 US gpm). The maximum water flow through the cooler assembly is 262 L/min (69 US gpm).
Lubricate the core with engine oil. Press the core into the housing to the following dimensions at both ends.
(A) The depth of the plate is the following value. ... 5.5 ± 0.5 mm (0.22 ± 0.02 inch)
(B) The depth of the tube is the following value. ... 1.5 ± 0.5 mm (0.06 ± 0.02 inch)
Caterpillar Information System:
2000/10/09 VIMS Data Events That Require the Engine to Shutdown Will Not Clear {7601}
3126B Engines Gear Group (Front) - Time
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Fuel Tank - Remove
3126B Engines for Caterpillar Built Machines Turbocharger - Install
140H and 160H Motor Graders Walk-Around Inspection
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Hydraulic Tank (Torque Converter, Hoist, Brake, and Transmission) - Install
C-10 and C-12 Industrial Engines Connecting Rod Bearing Journal
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System General Information
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems General Information
TK711, TK721, TK722 and TK732 Track Feller Bunchers Operator Station
2000/05/29 Spacers Provide Clearance between the Steel Tracks and the Loader Lift Arms {1221, 4170, 6119, 7054, 7254}
24H Motor Grader Ripper Linkage and Cylinder Bearings - Lubricate
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Cab - Remove
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System MID 082 - CID 0490 - FMI 03
3126B Engines Inlet Manifold Pressure - Test
2000/05/15 New Flash Software Now Available {7620}
3126B Engines Turbocharger - Inspect
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Excessive Valve Lash
2002/12/23 Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Excessive White Smoke
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Sloper - Adjust
988G Wheel Loader Electrohydraulic System MID 082 - CID 0562 - FMI 12
2000/05/15 Special Instruction is now Available for the Installation of a New Fork Leveling Lever, Bushes and Pins for the Boom Head {6501}
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Ejector Cylinder - Test