Special Instruction is now Available for the Installation of a New Fork Leveling Lever, Bushes and Pins for the Boom Head {6501}
- Telehandler:
- TH62 (PIN: 3LN1-UP; 4TM1-UP)
- TH82 (PIN: 3JN1-UP; 3KN1-UP)
The Special Instruction, REHS0803, "New Fork Leveling Lever,Bushes and Pins for the Boom Head" is now available.
This special instruction describes the procedure for replacing the fork leveling lever and the pins that are used to attach the fork leveling lever to the boom head and the attachment tilt cylinder. This instruction also gives information about the boring of the bosses in the boom head and the installation of new bushes.
The special instruction is available through the normal literature distribution system. The publication can also be found on the Caterpillar Service Information System (SIS).
Caterpillar Information System:
988G Wheel Loader Electrohydraulic System MID 082 - CID 0562 - FMI 12
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Sloper - Adjust
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Excessive White Smoke
2002/12/23 Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Excessive Valve Lash
3126B Engines Turbocharger - Inspect
2000/05/15 New Flash Software Now Available {7620}
3126B Engines Inlet Manifold Pressure - Test
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System MID 082 - CID 0490 - FMI 03
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Cab - Remove
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Cooler
2000/10/09 VIMS Data Events That Require the Engine to Shutdown Will Not Clear {7601}
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Ejector Cylinder - Test
3176C and 3196 Engines for Caterpillar Built Machines Engine Design
2000/07/31 Reducing Noise in the Boom {6501}
120H Motor Grader Walk-Around Inspection
D400E Series II Articulated Truck Steering, Suspension, and Ejector Body Hydraulic Systems Control Valve
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Pilot Control Actuator (Ejector)
621G and 627G Wheel Tractor-Scrapers Hydraulic System Pilot Control Actuator (Ejector)
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Proportional Solenoid (Ejector)
3126B Engine for Lexion 450, Lexion 460, and Lexion 460 R Combines Electrical Power Supply Circuit - Test
D400E Series II Articulated Truck Steering, Suspension, and Ejector Body Hydraulic Systems Suspension Accumulator
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Manifold (Tractor)
3176C and 3196 Engines for Caterpillar Built Machines General Information