Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
- Machine Engines:
- 3114
- 3116
- 3126
- 3126B
Features/Benefits
Show/hide table
Illustration 1 | g00947749 |
171-7212 Wear Sleeve |
If the crankshaft hub has extensive damage, the 171-7212 Wear Sleeve can be installed in order to repair the hub. The new wear sleeve can be use as a direct replacement for the 5P-6188 Wear Sleeve. The new sleeve should be used for hubs that require a wider sealing surface in order to repair the damage that has been caused by the front seal. Use the 5P-6208 Sleeve Driver in order to install the sleeve onto the hub.
Caterpillar Information System:
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Excessive Valve Lash
3126B Engines Turbocharger - Inspect
2000/05/15 New Flash Software Now Available {7620}
3126B Engines Inlet Manifold Pressure - Test
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System MID 082 - CID 0490 - FMI 03
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Cab - Remove
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Cooler
2000/10/09 VIMS Data Events That Require the Engine to Shutdown Will Not Clear {7601}
3126B Engines Gear Group (Front) - Time
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Fuel Tank - Remove
3126B Engines for Caterpillar Built Machines Turbocharger - Install
140H and 160H Motor Graders Walk-Around Inspection
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Excessive White Smoke
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Sloper - Adjust
988G Wheel Loader Electrohydraulic System MID 082 - CID 0562 - FMI 12
2000/05/15 Special Instruction is now Available for the Installation of a New Fork Leveling Lever, Bushes and Pins for the Boom Head {6501}
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Ejector Cylinder - Test
3176C and 3196 Engines for Caterpillar Built Machines Engine Design
2000/07/31 Reducing Noise in the Boom {6501}
120H Motor Grader Walk-Around Inspection
D400E Series II Articulated Truck Steering, Suspension, and Ejector Body Hydraulic Systems Control Valve
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Pilot Control Actuator (Ejector)
621G and 627G Wheel Tractor-Scrapers Hydraulic System Pilot Control Actuator (Ejector)
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Proportional Solenoid (Ejector)