Inlet Manifold Pressure - Test
通过比较进气歧管的压力与技术营销信息(TMI)中给出的信息,即可检查发动机的效率。 应在发动机功率下降,但是发动机又没有切实的故障迹象时采用本测试。
TMI 中列出了进气歧管的正确压力。 这一信息是在下述工况下拟定的。
- 干式大气压力为 96 kPa (28.8 in Hg)
- 外部气温为 25
°C (77 °F)
- 燃油等级为 35 API
这些条件的任何变化都可能影响进气歧管的压力。 外部空气的温度可能会高于以上给出的数值,而大气压力可能会低于以上给出的数值。 这种情况会导致进气歧管压力的测量值低于技术销售信息资料(TMI)中的压力。 外部空气如果气温低于,大气压力高于以上给出的数值的话会导致进气歧管压力测量值高于技术销售信息资料(TMI)中的压力。
燃油密度差异也会使马力(失速速度)和增压压力发生变化。 如果燃油等级高于API比重等级35,进气歧管的压力可能会低于技术销售信息资料(TMI)中给出的压力。 如果燃油等级低于 35 API,进气歧管的压力可能会高于技术销售信息资料(TMI)中给出的压力。 确保检查压力时进气和排气不受阻。
注: Caterpillar 电子技师(ET)可被用来检查进气歧管压力。
Show/hide table
所需工具     | ||
---|---|---|
零件号     | 零件描述     | 数量     |
1U-5470 或者 198-4240     |
发动机压力表总成 或者 数字压力指示器     |
1     |
Show/hide table
图 1 | g00293196 |
1U-5470 发动机压力测试表总成 |
有关使用 1U-5470 发动机压力表总成 所需的说明,请参阅专门说明书, SEHS8907, "使用 1U-5470 发动机压力表总成 "。 有关使用 198-4240 数字显示压力指示器 所需的说明,请参阅操作手册, NEHS0818, "使用 198-4240 数字显示压力指示器 "。
Show/hide table
图 2 | g01140264 |
压力测试位置 (1) 旋塞 |
使用下述程序测量进气歧管压力:
- 将管塞 (1) 从进气口盖上拆下。
- 在进气口盖的测试位置上连接 1U-5470 发动机压力表总成 。
注: 需要 T 形管接头或某些其他管路部件才能将增压压力传感器连接到测试位置。
- 记录数值。
- 比较步骤 3 中记录的数值与 TMI 中给出的压力值。
Caterpillar Information System:
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System MID 082 - CID 0490 - FMI 03
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Cab - Remove
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Cooler
2000/10/09 VIMS Data Events That Require the Engine to Shutdown Will Not Clear {7601}
3126B Engines Gear Group (Front) - Time
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Fuel Tank - Remove
3126B Engines for Caterpillar Built Machines Turbocharger - Install
140H and 160H Motor Graders Walk-Around Inspection
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Hydraulic Tank (Torque Converter, Hoist, Brake, and Transmission) - Install
C-10 and C-12 Industrial Engines Connecting Rod Bearing Journal
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System General Information
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems General Information
2000/05/15 New Flash Software Now Available {7620}
3126B Engines Turbocharger - Inspect
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Excessive Valve Lash
2002/12/23 Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Excessive White Smoke
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Sloper - Adjust
988G Wheel Loader Electrohydraulic System MID 082 - CID 0562 - FMI 12
2000/05/15 Special Instruction is now Available for the Installation of a New Fork Leveling Lever, Bushes and Pins for the Boom Head {6501}
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Ejector Cylinder - Test
3176C and 3196 Engines for Caterpillar Built Machines Engine Design
2000/07/31 Reducing Noise in the Boom {6501}
120H Motor Grader Walk-Around Inspection