2000/05/15 Caterpillar


New Flash Software Now Available {7620}

Usage:

143H 1AL
Motor Grader:
143H NA (PIN: 1AL92-UP)
120H NA (PIN: 2AN159-UP; 4MK741-UP)
160H (PIN: 2FM505-UP)
12H (PIN: 2GS431-UP; 4ER624-UP)
160H (PIN: 2HS393-UP)
12H NA (PIN: 2WR842-UP; 4XM2412-UP; 8MN719-UP)
140H NA (PIN: 2ZK4987-UP)
140H (PIN: 3AS548-UP; 5HM1565-UP)
140H NA (PIN: 9TN1024-UP; 9ZN351-UP)
160H NA (PIN: 3GM92-UP; 9EJ826-UP)
135H NA (PIN: 3YK417-UP)
163H NA (PIN: 5AK247-UP)
120H (PIN: 5FM1868-UP; 9YR437-UP)
135H (PIN: 8WN584-UP)
120H (PIN: 9FN545-UP)

Reference: Special Instruction, REHS0494, "Accessing Flash Software for Machines"

Reference: Service Manual, SENR9167, "Transmission Electronic Control For Countershaft Transmissions For Motorgraders"

Description of Change: The following new transmission ECM software groups are now shipped on motor graders effective with the above serial numbers. The new software improves performance in directional shifts.

Table 1
Transmission ECM Software    
Machine Configuration     Previous Part Number     New Part Number    
Basic
12H, 120H, 135H, 140H, 160H,143H, 163H    
186-6199
175-4043
172-6120
166-5956
154-6530
154-6530    
190-8457    
Autoshift
12H, 120H, 135H, 140H, 160H, 143H, 163H    
Premium     Premium    
Limited Road Speed Basic
12H, 120H, 135H, 140H, 160H, 143H, 163H    
186-6203
175-4047
172-6123
166-5966
154-6537
144-8700    
190-8462    
Limited Road Speed Autoshift
12H, 120H, 135H, 140H, 160H, 143H, 163H    
Premium     Premium    

  • The 190-8457 Software Group is the Basic Transmission Software.

  • Autoshift Transmission Software is only available as part of the 190-8461 Service Group .

  • The 190-8462 Software Group is the Basic Limited Road Speed software.

  • Autoshift Limited Road Speed Software is only available as part of the 190-8465 Service Group .

Note: Verify that you are using the latest software release that is available whenever you flash software.

Adaptable To: The new software groups are effective with the machines listed in Table 2 and the software is adaptable to first production on the listed machines.

Table 2
Model Number     Serial Number    
12H     (S/N: 8MN460-718)
(S/N: 4ER500-623)
(S/N: 2GS360-430)
(S/N: 2WR642-841)
(S/N: 4XM1396-2411)
(S/N: 5ZM298-303)    
120H     (S/N: 9YR270-436)
(S/N: 5FM800-1867)
(S/N: 2AN104-158)
(S/N: 4MK404-740)
(S/N: 9FN471-544)
(S/N: 3GR70-81)
(S/N: 6TM366-439)    
135H     (S/N: 8WN290-583)
(S/N: 3YK267-416)    
140H     (S/N: 9TN300-1023)
(S/N: 3AS450-547)
(S/N: 5HM1150-1564)
(S/N: 9ZN205-350)
(S/N: 2ZK2392-4986)
(S/N: 8JM280-294)
(S/N: 3FR152-195)    
143H     (S/N: 1AL408-791)    
160H     (S/N: 3GM80-91)
(S/N: 2HS380-392)
(S/N: 2FM400-504)
(S/N: 9EJ510-825)
(S/N: 9JM350-357)    
163H     (S/N: 5AK156-246)    

Caterpillar Information System:

3126B Engines Inlet Manifold Pressure - Test
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System MID 082 - CID 0490 - FMI 03
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Cab - Remove
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Cooler
2000/10/09 VIMS Data Events That Require the Engine to Shutdown Will Not Clear {7601}
3126B Engines Gear Group (Front) - Time
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Fuel Tank - Remove
3126B Engines for Caterpillar Built Machines Turbocharger - Install
140H and 160H Motor Graders Walk-Around Inspection
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Hydraulic Tank (Torque Converter, Hoist, Brake, and Transmission) - Install
C-10 and C-12 Industrial Engines Connecting Rod Bearing Journal
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System General Information
3126B Engines Turbocharger - Inspect
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Excessive Valve Lash
2002/12/23 Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Excessive White Smoke
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Sloper - Adjust
988G Wheel Loader Electrohydraulic System MID 082 - CID 0562 - FMI 12
2000/05/15 Special Instruction is now Available for the Installation of a New Fork Leveling Lever, Bushes and Pins for the Boom Head {6501}
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Ejector Cylinder - Test
3176C and 3196 Engines for Caterpillar Built Machines Engine Design
2000/07/31 Reducing Noise in the Boom {6501}
120H Motor Grader Walk-Around Inspection
D400E Series II Articulated Truck Steering, Suspension, and Ejector Body Hydraulic Systems Control Valve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.