Turbocharger - Install
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 检查涡轮增压器密封垫有无磨损或损坏。 如果涡轮增压器密封垫磨损或损坏，则用新件更换。
- 将 5P-3931 抗咬合剂 涂抹到涡轮增压器安装螺柱的螺纹上。
- 在排气歧管上定位涡轮增压器密封垫和涡轮增压器 (6) 。 安装将涡轮增压器 (6) 固定到排气歧管上的螺母 (4) 。
Show/hide table
 | |
| 图 1 | g00617565 |
- 上紧将涡轮增压器固定到排气歧管上的锁紧螺母。
将带有螺旋锁螺纹的 3E-8017 锁紧螺母 上紧到以下扭矩： ... 54 ± 5 N·m (40 ± 4 lb ft)
将标准 9X-6620 锁紧螺母 上紧到以下扭矩： ... 70 ± 5 N·m (50 ± 4 lb ft)
- 检查机油供应管组件 (5) 和管组件 (2) 的密封垫。 如果密封垫磨损或损坏，则用新件更换。
Show/hide table
 | |
| 图 2 | g00617515 |
- 将管组件 (2) 和密封垫定位到涡轮增压器 (6) 上。 将螺栓 (1) 安装到涡轮增压器上，并将螺栓 (3) 安装到缸体上。
- 为机油供应管组件 (5) 安装密封垫后将机油供应管组件 (5) 连接到涡轮增压器 (6) 上。
Caterpillar Information System:
140H and 160H Motor Graders Walk-Around Inspection
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Hydraulic Tank (Torque Converter, Hoist, Brake, and Transmission) - Install
C-10 and C-12 Industrial Engines Connecting Rod Bearing Journal
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System General Information
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems General Information
TK711, TK721, TK722 and TK732 Track Feller Bunchers Operator Station
2000/05/29 Spacers Provide Clearance between the Steel Tracks and the Loader Lift Arms {1221, 4170, 6119, 7054, 7254}
24H Motor Grader Ripper Linkage and Cylinder Bearings - Lubricate
TH62, TH63, TH82 and TH83 Telehandlers Power Train Transmission
TH62, TH63, TH82 and TH83 Telehandlers Power Train Main Drive Shaft
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Steering Wheel - Remove and Install
TH62, TH63, TH82 and TH83 Telehandlers Power Train Torque Converter
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Fuel Tank - Remove
3126B Engines Gear Group (Front) - Time
2000/10/09 VIMS Data Events That Require the Engine to Shutdown Will Not Clear {7601}
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Cooler
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Cab - Remove
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System MID 082 - CID 0490 - FMI 03
3126B Engines Inlet Manifold Pressure - Test
2000/05/15 New Flash Software Now Available {7620}
3126B Engines Turbocharger - Inspect
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Excessive Valve Lash
2002/12/23 Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Excessive White Smoke