Throttle Backup Switch
Show/hide table
| |
| Illustration 1 | g00690757 |
Show/hide table
|
Throttle Backup Switch (1) - If the signal from the throttle position sensor is invalid, throttle backup switch (1) will allow the engine to accelerate to 1300 rpm. Push the top half of throttle backup switch (1). This allows the machine to be moved to a convenient location in order to replace the throttle position sensor. |
Caterpillar Information System:
793C Off-Highway Truck Traction Control System (TCS) - Test
CB-534C Vibratory Compactor Fuel System Water Separator Element - Replace
CB-534C Vibratory Compactor Fuel System Water Separator - Drain
CB-534C Vibratory Compactor Fuel System Primary Filter - Clean/Inspect/Replace
2000/03/20 A Special Instruction for Installing an Auxiliary Lines Kit is now Available {5051, 5057}
D400E Series II Ejector Truck Machine Operation
G3304 and G3306 Engines Engine Speed Measurement
D400E Series II Ejector Truck Crushing Prevention and Cutting Prevention
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Saw Bar Cylinder Return Speed (Excavator) - Test and Adjust
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Feed Roller Arm Cylinder Pressure (Excavator) - Test and Adjust - HH55, HH65, and HH75
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Connecting Rod - Inspect
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Feed Roller Arm Cylinder Pressure (Excavator) - Test and Adjust - HH45 Only
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Speed Sensor - Replace
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Controller - Replace
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0295 FMI 02 Electronic Control Module (Machine) Incorrect Signal - Test
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Controller Input and Output Values
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0295 FMI 09 Electronic Control Module (Machine) Abnormal Update - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0295 FMI 12 Electronic Control Module (Machine) Failed - Test
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Gear Pump (Torque Converter Charging, Scavenge, and Brake Release)
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Gear Pump (Torque Converter Charging, Scavenge, and Brake Release)
2000/03/27 Dimensions in Special Instruction are now Updated {3260, 3269, 6116, 6118, 6119, 6125, 6126, 6127, 7057, 7069, 7100}
2000/05/01 A Guard for the Transmission Breather Can Be Installed {7153}
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Gear Pump (Hoist)
3618 Engine Main Bearings