A Special Instruction for Installing an Auxiliary Lines Kit is now Available {5051, 5057}
- Backhoe Loaders:
- 426C (PIN: 6XN3616-UP; 7WN939-UP; 1CR864-UP; 1ER864-UP; 1MR956-UP; 1NR954-UP; 1YR1517-UP; 1ZR926-UP)
- 436C (PIN: 8TN925-UP; 9JN884-UP; 1FR1416-UP; 1GR916-UP; 1PR1599-UP; 1RR998-UP; 2AR1604-UP; 2BR911-UP)
The Special Instruction, REHS0771, "Field Installation of the 169-0005 Auxiliary Lines Kits on the C-2 Series of the 426C and 436C Backhoe Loaders," outlines the basic steps in order to install the kit on a backhoe. The kit is required for the operation of work tools which are driven by hydraulic fluid.
This special instruction is designed for installing an auxiliary lines kit on a machine that has a six bank hydraulic arrangement for the operation of the backhoe.
The kit is available from the backhoe loader facility. The backhoe loader facility is located in the following city:
Clayton, North CarolinaThe special instruction is available through the normal literature ordering channels. The publication can also be found on the Caterpillar Service Information System (SIS).
Caterpillar Information System:
D400E Series II Ejector Truck Machine Operation
G3304 and G3306 Engines Engine Speed Measurement
D400E Series II Ejector Truck Crushing Prevention and Cutting Prevention
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Saw Bar Cylinder Return Speed (Excavator) - Test and Adjust
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Feed Roller Arm Cylinder Pressure (Excavator) - Test and Adjust - HH55, HH65, and HH75
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Connecting Rod - Inspect
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Feed Roller Arm Cylinder Pressure (Excavator) - Test and Adjust - HH45 Only
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System Piston Motor (Axle Propel)
D400E Series II Ejector Truck Ejector, Steering, and Brake System Breather - Replace
2002/05/27 The Correct Position of the Clamp Assembly is Required in order to Prevent Damage to the Tie Rod Assembly {4318, 4329}
D400E Series II Ejector Truck Ejector, Steering, and Brake System Tank Screen - Clean
D400E Series II Ejector Truck Ejector, Steering, and Brake System Oil Sample - Obtain
CB-534C Vibratory Compactor Fuel System Primary Filter - Clean/Inspect/Replace
CB-534C Vibratory Compactor Fuel System Water Separator - Drain
CB-534C Vibratory Compactor Fuel System Water Separator Element - Replace
793C Off-Highway Truck Traction Control System (TCS) - Test
793C Off-Highway Truck Throttle Backup Switch
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Speed Sensor - Replace
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Controller - Replace
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0295 FMI 02 Electronic Control Module (Machine) Incorrect Signal - Test
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Controller Input and Output Values
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0295 FMI 09 Electronic Control Module (Machine) Abnormal Update - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0295 FMI 12 Electronic Control Module (Machine) Failed - Test
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Gear Pump (Torque Converter Charging, Scavenge, and Brake Release)