312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Caterpillar


Operator Monitor

Usage:

322C ADX



图 1g00684315

监视器面板

(1) 油量表

(2) 发动机冷却液温度表

(3) 行动灯

(4) 发动机转速刻度盘指示器

(5) 液压油温度表

(6) 信息中心

液晶显示屏面板将显示各种警告和信息。 监视器面板包括以下部件:三块仪表, 行动灯, 发动机转速旋钮指示器, 信息中心 和 八个开关。




图 2g00685772

监视器面板

(7) "向上"键

(8) "向左"键

(9) "向右"键

(10) "向下"键

(11) "取消"键

(12) "设定"键

(13) "菜单"键

(14) "OK" 键

监视器上显示来自控制器的机器工况信息。 监视器具有三块仪表和多个报警指示灯。 每块仪表为机器系统内的一个参数所专用。 机器系统的某些可能参数如下所示:燃油油位, 发动机冷却液温度 和 液压油温度。 仪表从连接至控制器的传感器和发送器收到信息。 控制器使用来自各传感器输入的信息计算仪表中显示的值。 当机器系统中出现异常情况时,报警指示灯会通知操作员。 控制器使用来自压力开关、传感器和其他输入的信息,以便确定异常情况出现的时间。 控制器将向监视器面板发送消息。 随后,监视器面板使具有异常工况机器系统的报警指示灯闪烁。 控制器将处理来自监视器面板开关的信息。 利用开关选择各种功能。 控制器将接收此信息并执行所请求的工作或工作模式。

Caterpillar Information System:

3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders Analog Sensor Supply
554 Forwarder and 574 Forwarder Machine System Pressures - Test/Adjust
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Slope Control
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Lift Cylinder and Tilt Cylinder (Tilt and Tip Function) Drift - Check
554 Forwarder and 574 Forwarder Brake Discs - Check
140H and 160H Motor Graders Autoshift
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Hydrostatic Drive System - 550 and 570 Wheel Harvester
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Auger Conveyor
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS &trade; MID 049 - CID 0855 - FMI 08
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS &trade; MID 049 - CID 0855 - FMI 04
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS &trade; MID 049 - CID 0855 - FMI 03
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS &trade; MID 049 - CID 0854 - FMI 08
3408E and 3412E Engines for Caterpillar Built Machines Flywheel - Inspect
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders ECM/Personality Module
554 Forwarder and 574 Forwarder Steering Cylinder Mounting Bolts - Tighten
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Travel Lock
143H and 163H Motor Graders Cooling System Coolant (ELC) - Change
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Width Control
120H Motor Grader Cooling System Coolant (ELC) - Change
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System Cab Mounting
2000/04/03 Improved Serviceability for the Grease Fitting on the Boom Raise Cylinder {5456}
725 and 730 Articulated Trucks Steering Cylinder Bearings - Lubricate
TH103 Telehandler Safety Signs and Labels
Powering and Interfacing to Agricultural Implement Electronic Systems{1408, 6304, 6330, 6331, 7300, 7332, 7490} Powering and Interfacing to Agricultural Implement Electronic Systems{1408, 6304, 6330, 6331, 7300, 7332, 7490}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.