Screed Travel Lock
Show/hide table
In order to prevent personal injury from accidental screed movement, lock the screed in the RAISED position by using the travel lock lever in order to extend the lock pins, after the screed is fully raised. |
Show/hide table
Illustration 1 | g00510790 |
Screed travel lock lever Typical example |
Show/hide table
Illustration 2 | g00585257 |
Lock pins Typical example |
There are two levers on the machine. The levers are located behind the operator station on either side of the machine. The lock pins are used in order to hold the screed in a RAISED position for travel.
- Raise the screed to a position that is high enough to extend the lock pins.
- Move the lever in order to extend the lock pins to the fullest extension.
- Lower the screed onto the lock pins.
Caterpillar Information System:
554 Forwarder and 574 Forwarder Steering Cylinder Mounting Bolts - Tighten
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders ECM/Personality Module
3408E and 3412E Engines for Caterpillar Built Machines Flywheel - Inspect
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Operator Monitor
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders Analog Sensor Supply
554 Forwarder and 574 Forwarder Machine System Pressures - Test/Adjust
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Slope Control
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Lift Cylinder and Tilt Cylinder (Tilt and Tip Function) Drift - Check
554 Forwarder and 574 Forwarder Brake Discs - Check
140H and 160H Motor Graders Autoshift
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Hydrostatic Drive System - 550 and 570 Wheel Harvester
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Auger Conveyor
143H and 163H Motor Graders Cooling System Coolant (ELC) - Change
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Width Control
120H Motor Grader Cooling System Coolant (ELC) - Change
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System Cab Mounting
2000/04/03 Improved Serviceability for the Grease Fitting on the Boom Raise Cylinder {5456}
725 and 730 Articulated Trucks Steering Cylinder Bearings - Lubricate
TH103 Telehandler Safety Signs and Labels
Powering and Interfacing to Agricultural Implement Electronic Systems{1408, 6304, 6330, 6331, 7300, 7332, 7490} Powering and Interfacing to Agricultural Implement Electronic Systems{1408, 6304, 6330, 6331, 7300, 7332, 7490}
140H and 160H Motor Graders Cooling System Coolant (ELC) - Change
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Crown Control
16H Motor Grader Cooling System Coolant (ELC) - Change
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders Engine Speed/Timing Sensor