Cab Mounting
Show/hide table
 | |
| Illustration 1 | g00684438 |
(1) Torque for the two nuts ... 270 ± 15 N·m (200 ± 12 lb ft)
(2) Torque for the two nuts ... 240 ± 40 N·m (180 ± 30 lb ft)
(3) Torque for the two nuts ... 100 ± 10 N·m (75 ± 8 lb ft)
(4) Torque for the two bolts ... 240 ± 40 N·m (180 ± 30 lb ft)
(5) Torque for the two nuts ... 50 ± 5 N·m (38 ± 4 lb ft)
(6) Torque for the two nuts ... 50 ± 5 N·m (38 ± 4 lb ft)
Caterpillar Information System:
120H Motor Grader Cooling System Coolant (ELC) - Change
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Width Control
143H and 163H Motor Graders Cooling System Coolant (ELC) - Change
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Travel Lock
554 Forwarder and 574 Forwarder Steering Cylinder Mounting Bolts - Tighten
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders ECM/Personality Module
3408E and 3412E Engines for Caterpillar Built Machines Flywheel - Inspect
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Operator Monitor
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders Analog Sensor Supply
554 Forwarder and 574 Forwarder Machine System Pressures - Test/Adjust
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Slope Control
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Lift Cylinder and Tilt Cylinder (Tilt and Tip Function) Drift - Check
2000/04/03 Improved Serviceability for the Grease Fitting on the Boom Raise Cylinder {5456}
725 and 730 Articulated Trucks Steering Cylinder Bearings - Lubricate
TH103 Telehandler Safety Signs and Labels
Powering and Interfacing to Agricultural Implement Electronic Systems{1408, 6304, 6330, 6331, 7300, 7332, 7490} Powering and Interfacing to Agricultural Implement Electronic Systems{1408, 6304, 6330, 6331, 7300, 7332, 7490}
140H and 160H Motor Graders Cooling System Coolant (ELC) - Change
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Crown Control
16H Motor Grader Cooling System Coolant (ELC) - Change
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders Engine Speed/Timing Sensor
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Piston Pump (Power Train)
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ MID 049 - CID 0890 - FMI 09
2000/05/01 Additional Clutch Disc and Plate Improve Transmission Performance {3030}
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Oil Filter and Base (Transmission Charging) - Disassemble