Machine System Pressures - Test/Adjust
To ensure that the machine will continue to function properly, the pressures of the various hydraulic systems must be tested. If adjustments are necessary, a trained service person should perform any adjustment procedures.
Reference: Refer to Testing and Adjusting, RENR3031, "554 Forwarder and 574 Forwarder Hydraulic Systems" for more information.
Caterpillar Information System:
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Slope Control
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Lift Cylinder and Tilt Cylinder (Tilt and Tip Function) Drift - Check
554 Forwarder and 574 Forwarder Brake Discs - Check
140H and 160H Motor Graders Autoshift
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Hydrostatic Drive System - 550 and 570 Wheel Harvester
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Auger Conveyor
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ MID 049 - CID 0855 - FMI 08
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ MID 049 - CID 0855 - FMI 04
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ MID 049 - CID 0855 - FMI 03
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ MID 049 - CID 0854 - FMI 08
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ MID 049 - CID 0854 - FMI 04
AP-1000B and BG-260C Asphalt Pavers Auxiliary System Hydraulic Cylinder (Steering)
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders Analog Sensor Supply
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Operator Monitor
3408E and 3412E Engines for Caterpillar Built Machines Flywheel - Inspect
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders ECM/Personality Module
554 Forwarder and 574 Forwarder Steering Cylinder Mounting Bolts - Tighten
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Travel Lock
143H and 163H Motor Graders Cooling System Coolant (ELC) - Change
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Width Control
120H Motor Grader Cooling System Coolant (ELC) - Change
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System Cab Mounting
2000/04/03 Improved Serviceability for the Grease Fitting on the Boom Raise Cylinder {5456}
725 and 730 Articulated Trucks Steering Cylinder Bearings - Lubricate