Belt Tension Switch - Remove
Removal Procedure
Start By:
- Remove the belt tensioner. Refer to Disassembly and Assembly, "Belt Tensioner Group - Remove" for the correct procedure.
- Remove eight bolts (4) and the eight washers.
Show/hide table
 | |
| Illustration 1 | g00573178 |
- Lift rubber protector cover (1) .
- Slide belt tension switch (2) forward on frame (5) .
- Disconnect the quick disconnect plug on wiring (3) to the belt tension switch. Remove the belt tension switch.
Caterpillar Information System:
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Quick Hitch - Remove
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Drawbar Cage - Remove and Install
797 Off-Highway Truck Power Train Tire and Rim (Rear) - Install
797 Off-Highway Truck Power Train Tire and Rim (Rear) - Remove
D400E Series II Articulated Truck Power Train Interaxle Differential - Assemble
797 Off-Highway Truck Power Train Final Drive, Brake and Wheel (Rear) - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Drawbar - Remove and Install
797 Off-Highway Truck Power Train Final Drive, Brake and Wheel (Rear) - Remove
797 Off-Highway Truck Power Train Differential and Bevel Gear - Remove
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Install
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Burner Control
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Counterbalance Control - If Equipped
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
35, 45 and 55 Challengers Power Train Belt Tension Switch - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Quick Hitch - Disassemble
3524B and C175 Engines for Off-Highway Truck/Tractors Exhaust Manifold
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Quick Hitch - Assemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Quick Hitch - Install
D350E Series II Articulated Truck Another Service Brake System Valve - Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0672 FMI 01 Speed Sensor (Torque Converter Output) Below Normal Range - Test
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Steering System Charge Oil Pressure Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0826 FMI 11 Temperature Sensor (Torque Converter Oil) Failure Mode Not Identifiable - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0827 FMI 08 Temperature Sensor (Left Exhaust) Abnormal Signal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0828 FMI 08 Temperature Sensor (Right Exhaust) - Test