Quick Hitch - Assemble
Assembly Procedure
- Install latch (18) on rod assembly (13). Install spring pin (17) .
Show/hide table
 | |
| Illustration 1 | g00574783 |
Show/hide table
 | |
| Illustration 2 | g00574782 |
- Install spring (14) and washer (15) on rod assembly (13). Install spring pin (16) on rod assembly (17) .
Show/hide table
 | |
| Illustration 3 | g00574779 |
Show/hide table
 | |
| Illustration 4 | g00574780 |
Show/hide table
 | |
| Illustration 5 | g00574781 |
- Install rod assembly (13) on arm (8). Install spring pin (12).
Show/hide table
 | |
| Illustration 6 | g00574777 |
Show/hide table
 | |
| Illustration 7 | g00574778 |
- Install lever assembly (11). Install cotter (9) and pin (10).
Show/hide table
 | |
| Illustration 8 | g00574776 |
- Install cover (7) on side arm (8). Install three bolts (6) and the washers. Tighten bolts (6) to 55 ± 10 N·m (41 ± 7 lb ft).
Show/hide table
 | |
| Illustration 9 | g00574774 |
- Install top hook assembly (5). Tighten the bolts to the top hook assembly to 900 ± 100 N·m (664 ± 74 lb ft). Install four bolts (4). Tighten bolts (4) to 530 ± 70 N·m (391 ± 52 lb ft). Install four bolts (1). Install arm (2) on tube (3) .
Show/hide table
 | |
| Illustration 10 | g00574773 |
End By: Install the quick hitch. Refer to Disassembly and Assembly, "Quick Hitch - Install" for the machine that is being serviced.
Caterpillar Information System:
3524B and C175 Engines for Off-Highway Truck/Tractors Exhaust Manifold
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Quick Hitch - Disassemble
35, 45 and 55 Challengers Power Train Belt Tension Switch - Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
35, 45 and 55 Challengers Power Train Belt Tension Switch - Remove
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Quick Hitch - Remove
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Drawbar Cage - Remove and Install
797 Off-Highway Truck Power Train Tire and Rim (Rear) - Install
797 Off-Highway Truck Power Train Tire and Rim (Rear) - Remove
D400E Series II Articulated Truck Power Train Interaxle Differential - Assemble
797 Off-Highway Truck Power Train Final Drive, Brake and Wheel (Rear) - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Drawbar - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Quick Hitch - Install
D350E Series II Articulated Truck Another Service Brake System Valve - Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0672 FMI 01 Speed Sensor (Torque Converter Output) Below Normal Range - Test
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Steering System Charge Oil Pressure Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0826 FMI 11 Temperature Sensor (Torque Converter Oil) Failure Mode Not Identifiable - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0827 FMI 08 Temperature Sensor (Left Exhaust) Abnormal Signal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0828 FMI 08 Temperature Sensor (Right Exhaust) - Test
D400E Series II Articulated Truck Service Brake - Assemble
D350E Series II and D400E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Cylinder - Test
D350E Series II and D400E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hydraulic Oil Contamination - Test
TH62, TH63, TH82 and TH83 Telehandlers Mounting and Dismounting
TH62, TH63, TH82 and TH83 Telehandlers Starting Above 0°C (32°F)