Bulldozer C-Frame - Install
Installation Procedure
- Very carefully move the machine into C-frame (3).
Show/hide table
 | |
| Illustration 1 | g00634472 |
- Install the shims, pin (7), retainer (9), and bolts (8) on each side of the machine.
Show/hide table
 | |
| Illustration 2 | g00634469 |
- Install pin (5), retainer (6), and the bolt on each side of the machine.
Show/hide table
 | |
| Illustration 3 | g00634468 |
- Connect three hydraulic hose assemblies (4) on each side of the machine.
Show/hide table
 | |
| Illustration 4 | g00634467 |
- Remove Tooling (B) from C-frame (3) .
Show/hide table
 | |
| Illustration 5 | g00634466 |
- Use Tool (A) to put bottom guard (2) in position for installation. Install bolts (1) in the bottom guard.
Show/hide table
 | |
| Illustration 6 | g00634464 |
- Check the hydraulic oil level.
Note: Refer to the Operation and Maintenance Manual, SEBU7001, "Hydraulic System Oil Level - Check" for the correct procedure.
End By: Install the bulldozer blade.
Caterpillar Information System:
527 Track-Type Skidder Machine Supplements Bulldozer C-Frame - Remove
527 Track-Type Skidder Machine Supplements Bulldozer Singletree - Remove and Install
527 Track-Type Skidder Machine Supplements Bulldozer Blade (Power Angle) - Remove and Install
527 Track-Type Skidder Machine Supplements Bulldozer Blade (Power Angle and Tilt) - Remove and Install
527 Track-Type Skidder Machine Supplements Seat - Remove and Install
527 Track-Type Skidder Machine Supplements Cab - Install
527 Track-Type Skidder Machine Supplements Cab - Remove
527 Track-Type Skidder Machine Supplements Rollover Protective Structure (ROPS, Enclosed Cab) - Remove and Install
527 Track-Type Skidder Machine Supplements Rollover Protective Structure (ROPS, Open Cab) - Remove and Install
527 Track-Type Skidder Machine Supplements Sweeps - Remove and Install
527 Track-Type Skidder Machine Supplements Receiver-Dryer - Remove and Install
527 Track-Type Skidder Machine Supplements Refrigerant Evaporator Coil and Heater Core - Install
527 Track-Type Skidder Machine Supplements Bulldozer Lift Cylinder - Remove
527 Track-Type Skidder Machine Supplements Bulldozer Lift Cylinder - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Three-Point Hitch Relief Valve
3176C and 3196 Engines For Caterpillar Built Machines Electronic Control Module - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Air Conditioner - Install
554 Forwarder and 574 Forwarder Articulation Bearings - Lubricate
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Piston Motor (Fan Drive)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Magnetic Screen (Transmission)
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Steering Drift
D250E Series II and D300E Series II Articulated Trucks Power Train Wheel Bearings and Duo-Cone Seals - Remove
3114, 3116 and 3126 MUI Engine Governors Governor Limiting Circuit (Types I, II, III, and IV)
D250E Series II and D300E Series II Articulated Trucks Power Train Wheel Bearings and Duo-Cone Seals - Install