Bulldozer Blade (Power Angle) - Remove and Install
Removal Procedure
Show/hide table
NOTICE |
---|
Be sure that the machine is on level ground. Stop the engine and move the control lever so that the weight of the C-frame is supported by the wood block. |
- Support C-frame (1) on a wood block so that blade (2) is not setting on the ground.
Show/hide table
Illustration 1 | g00634353 |
- Attach a suitable lifting device to blade (2) and support the blade.
Show/hide table
Illustration 2 | g00634354 |
- Remove the bolt, retainer (4), and pin (3) .
Show/hide table
Illustration 3 | g00634355 |
- Remove the bolts, retainer (5) and pin (6) .
Show/hide table
Illustration 4 | g00634356 |
- Remove retaining bolt (7) and pin (8). Remove the blade from the machine. The weight of the blade is approximately 908 kg (2000 lb).
Show/hide table
Illustration 5 | g00634357 |
Installation Procedure
- The weight of the blade is approximately 908 kg (2000 lb). Attach a lifting device to the blade and put the blade in position for installation. Install pin (6), retainer (5), and the bolts.
Show/hide table
Illustration 6 | g00634356 |
- Install pin (8) and retaining bolt (7) .
Show/hide table
Illustration 7 | g00634357 |
- Install pin (3), retainer (4), and the bolts.
Show/hide table
Illustration 8 | g00634355 |
- Start the engine and raise blade (2) so that C-frame (1) is off the wood block. Remove the wood block and lower the blade. Turn off the engine.
Show/hide table
Illustration 9 | g00634353 |
Caterpillar Information System:
527 Track-Type Skidder Machine Supplements Bulldozer Blade (Power Angle and Tilt) - Remove and Install
527 Track-Type Skidder Machine Supplements Seat - Remove and Install
527 Track-Type Skidder Machine Supplements Cab - Install
527 Track-Type Skidder Machine Supplements Cab - Remove
527 Track-Type Skidder Machine Supplements Rollover Protective Structure (ROPS, Enclosed Cab) - Remove and Install
527 Track-Type Skidder Machine Supplements Rollover Protective Structure (ROPS, Open Cab) - Remove and Install
527 Track-Type Skidder Machine Supplements Sweeps - Remove and Install
527 Track-Type Skidder Machine Supplements Receiver-Dryer - Remove and Install
527 Track-Type Skidder Machine Supplements Refrigerant Evaporator Coil and Heater Core - Install
527 Track-Type Skidder Machine Supplements Refrigerant Evaporator Coil and Heater Core - Remove
527 Track-Type Skidder Machine Supplements Refrigerant Condenser Fans and Motor - Remove and Install
527 Track-Type Skidder Machine Supplements Refrigerant Condenser - Remove and Install
527 Track-Type Skidder Machine Supplements Bulldozer Singletree - Remove and Install
527 Track-Type Skidder Machine Supplements Bulldozer C-Frame - Remove
527 Track-Type Skidder Machine Supplements Bulldozer C-Frame - Install
527 Track-Type Skidder Machine Supplements Bulldozer Lift Cylinder - Remove
527 Track-Type Skidder Machine Supplements Bulldozer Lift Cylinder - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Three-Point Hitch Relief Valve
3176C and 3196 Engines For Caterpillar Built Machines Electronic Control Module - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Air Conditioner - Install
554 Forwarder and 574 Forwarder Articulation Bearings - Lubricate
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Piston Motor (Fan Drive)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Magnetic Screen (Transmission)
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Steering Drift