Track Roller - Install
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 8S-7610 | Base Assembly | 2 |
| A | 8S-7650 | Cylinder | 2 |
| A | 3S-6224 | PumpGroup Hydraulic | 2 |
| B | 8S-7640 | Stand | 2 |
| B | 8S-7611 | Tube | 2 |
| B | 8S-7615 | Pin | 2 |
| C | FT-1309 | Track Roller Lifting Frok | 1 |
- Fasten a hoist and a suitable lifting device to Tooling (C). Align the flat side of the roller shaft with the roller frame and put track roller (2) in position.
Show/hide table
 | |
| Illustration 1 | g00543868 |
- Put caps (1) in position on each side of the roller and install the bolts.
- Use Tooling (A) to raise the side of the tractor. Remove Tooling (B). Lower the tractor to the ground with Tooling (A) .
- Adjust the track tension.
Caterpillar Information System:
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Sensor Signal Voltage - Test
3176C and 3196 Engines for Caterpillar Built Machines Electronic Control System Components
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Pulse Width Modulated (PWM) Sensor - Test
583R Pipelayer Power Train Track Roller - Remove
D250E Series II and D300E Series II Articulated Trucks Power Train Final Drive - Install
784C and 785C Off-Highway Trucks Machine Systems Fuel Tank - Remove
583R Pipelayer Power Train Transmission and Bevel Gears - Separate
793C Off-Highway Truck/Tractor Power Train Drive Shaft (Main) - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Power Train Final Drive - Remove
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Alert Indicator - Troubleshoot
583R Pipelayer Power Train Torque Divider - Install
784C and 785C Off-Highway Truck/Tractors Steering System Worksheets
583R Pipelayer Power Train Transmission and Bevel Gears - Connect
D250E Series II and D300E Series II Articulated Trucks Power Train Torque Converter - Disassemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Diverter Valve
527 Track-Type Skidder Power Train Transmission and Torque Converter Pump
527 Track-Type Skidder Warning Signs and Labels
3306C Engines for Caterpillar Built Machines Crankshaft
784C and 785C Off-Highway Trucks Machine Systems Fuel Tank - Install
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Service and Parking Brake (Rear) - Disassemble
527 Track-Type Skidder Power Train Torque Converter
D250E Series II and D300E Series II Articulated Trucks Power Train Torque Converter and Retarder - Connect
773D Off-Highway Truck and 775D Quarry Truck Pressure Control Valve (Transmission)
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Sensor Dynamic Test