Governor (Type I)
Show/hide table
 | |
| Illustration 1 | g00518804 |
Typical Type I Governor (1) Type I throttle (2) Fuel ratio control | |
The type code for the Type I governor is "A". Type I governors are also known as 2.0 Gain Governors.
Note: The term "2.0 Gain" refers to the ratio between riser travel and output shaft travel.
Type I governors include the following part numbers:
Show/hide table
| Part Numbers For Type I Governors | ||
|---|---|---|
| 4P-2557 | 5R-8840 | 5R-9007 |
| 7C-4176 | 7C-6867 | 7C-6869 |
| 7E-0001 | 7E-0002 | 7W-5557 |
| 7W-8178 | 9Y-0178 | 9Y-1094 |
| 9Y-2282 | 9Y-2675 | 9Y-2677 |
| 9Y-2678 | 9Y-2680 | 9Y-3160 |
| 9Y-3833 | 9Y-4025 | 9Y-4150 |
| 9Y-7899 | ||
Caterpillar Information System:
143H and 163H Motor Graders All Wheel Drive Solenoid Valve (All Wheel Drive) - Test
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft - Install
G3B, K3A and L3A Denso Alternators T3 Charging System - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Standard Power Train Hydrostatic System
784C and 785C Off-Highway Trucks Machine Systems Steering Cylinder - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Check Valve (Primary Air Tank) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Check Valve (Air/Hydraulic Cylinder) - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Steering Cylinder - Remove
3114, 3116 and 3126 MUI Engine Governors Governor Identification - Introduction
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Brake Valve (Parking and Secondary) - Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Tilt Cylinder - Isolation and Drift Check
554 Forwarder and 574 Forwarder Hydraulic System Pressure Reducing Valve (Maximum Signal)
583R Pipelayer Power Train Steering Clutch and Brake - Assemble
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System General Information
3114, 3116 and 3126 MUI Engine Governors Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors Governor (Type III)
3306C Engines for Caterpillar Built Machines Crankshaft Hub and Damper
572R Pipelayer Power Train Final Drive Planetary Carrier (In Chassis) - Remove
789C Off-Highway Truck/Tractor Air System and Brakes Oil Filter (Parking Brake Release)
554 Forwarder and 574 Forwarder Hydraulic System Grapple Rotator
988G Wheel Loader Engine Starting with Ether Starting Aid
143H and 163H Motor Graders All Wheel Drive Solenoid Valve (Pump Pressure) - Test
789C Off-Highway Truck/Tractor Air System and Brakes Brake Cooling System
966G Wheel Loader and 972G Wheel Loader Braking System Foot Brake Control