Hook Sheave Block (Upper) - Install
Installation Procedure
Note: Always install the boom line prior to installation of the hook load line and the sheave blocks for the hook load line.
Show/hide table
 | |
| Illustration 1 | g00639810 |
- Lower the boom. Use a hoist to install upper hook sheave block (3) in position. The weight of the upper hook sheave block is 150 kg (330 lb).
- Install pin (1). Install retaining pin (2) and the cotter pin.
End By: Install the lower hook sheave block. Refer to Disassembly and Assembly, "Hook Sheave Block (Lower) - Install".
Caterpillar Information System:
583R Pipelayer Machine Systems Boom Sheave Block (Lower) - Remove
583R Pipelayer Machine Systems Implement Pump - Disassemble
572R Pipelayer Power Train Track - Disassemble
980G Wheel Loader Power Train Relief Valve (Torque Converter Outlet) - Assemble
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Water Tank (Rear)
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Electric Starting Motor - Remove and Install
583R Pipelayer Machine Systems Bottom Guard - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Relay Valve (Air Start) - Remove and Install
966F Series II Wheel Loader Power Train Output Transfer Gears - Disassemble
980G Wheel Loader Power Train Relief Valve (Torque Converter Outlet) - Disassemble
3406E and 3456 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
980G Wheel Loader Power Train Relief Valve (Torque Converter Outlet) - Remove
583R Pipelayer Machine Systems Implement Pump - Assemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Water Separator - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0075 FMI 03 Temperature Sensor (Steering Oil) Voltage Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0075 FMI 04 Temperature Sensor (Steering Oil) Voltage Below Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0075 FMI 06 Temperature Sensor (Steering Oil) Current Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0096 FMI 03 Level Sensor (Fuel) Voltage Above Normal - Test
784C and 785C Off-Highway Trucks Machine Systems Air Dryer - Remove and Install
966G Wheel Loader and 972G Wheel Loader Engine Supplement Piston Motor (Hydraulic Fan) - Disassemble
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Position Sensor (Hoist Control)
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0096 FMI 04 Level Sensor (Fuel) Voltage Below Normal - Test
583R Pipelayer Machine Systems Cable - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Steering Frame Lock - Separate and Connect