Engine Oil Filter Base - Remove
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 2P-8250 | Strap Wrench Assembly | 1 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove plug (1) and drain the oil from the engine oil filter base into a suitable container for storage or disposal.
- Use Tool (A) to remove oil filter (2).
Show/hide table
Illustration 2 g00497250 Typical example - Disconnect turbocharger oil line (4).
- Remove nuts (3) that hold the engine oil filter base to the engine oil cooler and bolts (6) that hold the engine oil filter base to the cylinder block.
- Remove engine oil filter base (5).
Show/hide table
| |
| Illustration 1 | g00497217 |
|
Typical example | |
Caterpillar Information System:
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System Sensors
784C and 785C Off-Highway Trucks Machine Systems Piston Pump (Steering) - Remove
583R Pipelayer Power Train Torque Divider - Assemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Service Brakes
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Differential Steering System Power Flow
69D and 769D Off-Highway Trucks and 771D Quarry Truck Turbocharger Manifold - Remove and Install
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Auxiliary System Gear Motor (Ventilation System)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Auxiliary System Flow Control Valve (Ventilation System)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Hydraulic Cylinder (Throttle Control)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Auxiliary System Hydraulic Cylinder (Screed Hoist)
583R Pipelayer Power Train Torque Divider - Disassemble
3408E and 3412E Industrial Engines Crankshaft
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Stump Treatment System - If Equipped
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Control Valve (Hoist) - Assemble
784C and 785C Off-Highway Trucks Machine Systems Piston Pump (Steering) - Install
3406E On-Highway Engine Engine Oil Cooler - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
583R Pipelayer Engine Supplement Radiator Guard and Radiator - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Motor (Hydrostatic) - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Motor (Hydrostatic) - Disassemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Pump Efficiency Check
583R Pipelayer Engine Supplement Engine and Torque Divider - Remove
784C and 785C Off-Highway Trucks Machine Systems Metering Pump (Steering) - Remove
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Engine Rear Mount - Remove